Sell on Jumia
Filter
Brand
Hc 06 bluetooth module
(9 products found)
/product/89/30656/1.jpg?5470)
/product/45/1945914/1.jpg?4675)
/product/87/7302024/1.jpg?6176)
/product/99/9623914/1.jpg?6427)
/product/41/9191622/1.jpg?5728)
/product/89/6665914/1.jpg?6721)
/product/28/8509583/1.jpg?7627)
/product/49/2525914/1.jpg?6018)
/product/27/0044514/1.jpg?8983)
Filter
Frequently Asked Questions About hc 06 bluetooth module
How do I choose the right HC-06 Bluetooth module category for my project?
Choose based on Bluetooth Classic needs, power supply, and MCU interface. The HC-06 Bluetooth module is a slave-only Bluetooth Classic device in the HC-series, so your master controller must initiate connections. Verify the supply voltage (commonly 3.3–6V) and that your microcontroller UART uses compatible logic levels, adding a level shifter if needed. Look for AT command support to set the device name, baud rate, and pairing code, and ensure the breakout provides a practical 6-pin header for easy wiring.
Which attribute of the HC-06 Bluetooth module is the most complex to evaluate, and how should I assess its mode and AT configuration?
Mode and AT configuration determine how you set its behavior and identification. The HC-06 is normally slave-only, so it cannot initiate a connection; a master device must start pairing. Enter AT mode by applying the KEY pin signal during power-up, then configure baud rate, device name, and pairing code via AT commands. After configuration, use a compatible UART baud setting on your MCU to match the module (common options include 9600, 38400, or 115200 bps).
HC-06 Bluetooth module usage scenarios: which fits a beginner versus a pro?
For beginners, the HC-06 makes it easy to send data between a microcontroller (like an Arduino) and a smartphone using Bluetooth Classic; pair once and focus on basic data exchange. Pro users can tailor connections in AT mode, manage multiple scripts, optimize baud rates for faster data or longer range, and integrate with custom apps or automation systems; ensure robust grounding and power management. The beginner path emphasizes simplicity, while the pro path emphasizes control and reliability.
HC-06 Bluetooth module maintenance/compatibility: how to mount, clean, and keep it working?
Mount the HC-06 module on a stable breakout or PCB, keep it dry and free of dust, and avoid moisture. Do not drive RX with 5V logic; use a voltage divider or level shifter when connecting to 5V MCUs, and provide a clean 3.3–6V supply with adequate current. Tie grounds between devices and protect from static. Verify compatibility by matching UART baud and ensuring Bluetooth Classic SPP support on connected devices.
What features should I check when buying an HC-06 Bluetooth module?
When shopping for an HC-06 Bluetooth module, check the supply voltage range, a clear 6-pin breakout, and AT command support for customization. Look for modules from generic brands within the HC-series, ensuring essential pins (VCC, GND, TX, RX) are accessible and that Bluetooth Classic with SPP compatibility is supported. Confirm documented defaults for baud rate, pairing code, and safe operating conditions. Helpful extras include a visible LED indicator and clear pinout notes for quick setup.
back to top