Focustar 300W Portabl Power Station Outdoor Mobile Power Emergency Power With LCD Light

Points for attention:
The portable power station device has high voltage AC Output, which is potentially dangerous and must be handled with carc and kept away from children, otherwise there will be a risk ofelectric shock.
DO not connect the inverter of the portable power station to the AC Circuit, otherwise even if the switch of the device is turned off, the inverter ofthe device maybe damaged
please cns urc that the power used by the electrical appliance is less than the rated output power of the portable power station device.
Before the loadis connected to the portable power station device, be sure to turn offthe load switch before connecting it, and then turn on the load switch for use.
It is recommended to charge the portable POWEr station device  for at least  10 hours before use.  Insert the AC adapter charger into the portable power station's charging port when charging. The portable power station device can also be used without charging, but the backup time will be less than the standard backup time.
It is prohibited to  connect half wavc (hair dryer,  electric heating wire heater) load, high-power motor, laser printer, high-power rectifier load. The portable power station will be automatically protected because of the excessive  starting power during operation.

Description ofprotection functions and application scenarios:
1.  protection  functions:   ovcr  voltage  protection,   ovcr  current  protection,   ovcr  temperature  protection,  overcharge protection, short circuit protection, under voltage protection.
2. Application  scenarios:  home  c merge ncy power  supply, outdoor  camping  power supply, night  construction power supply, emergency rescue power supply, etc.
use load type:
1. AC fans, DC fans, AC LED lights, DC LED lights, digital products, mobile phones, desktop computers, notebook computers, TVS, vacuum cleaners, etc.

Operation method:
Power on:
1. When there is no charging, press the power switch on the panel for more than 3 seconds, release it after theLCD display lights up, and then press the corresponding function switch at this time, there will be acorresponding output. lf the corresponding function switch is not pressed within 10 seconds, the portablepower station will enter the automatic shutdown state.
2. lf there is solar energy and DC charger are connected, the LCD screen will automatically light up.
At this time, press the corresponding function switch, and there will be a corresponding output.

Power off:
1. When there is no charging, press and hold the power switch on the panel for more than 3 seconds.release it after the LCD screen goes out, and then shut the portable power station down.2. lf the solar energy and DC charger are connected, the LCD cannot be turned off, so turn off thecorresponding function switches and turn off each output.3. When there is no charging and no output switches are turned on, it will automatically shut down after 10seconds.

Note: The portable power station has DC under voltage and over voltage protection functions. When thebattery is under voltage or over voltage, it will automatically shut down.