Fused extension cord

Choose the fused extension cord by matching its load rating, outlets, safety features, length, and built‑in ports to your needs. For a typical setup, look for a generic 5‑way surge protector with a fused plug, a high wattage rating around 2860W, a 3m cable, and two USB ports plus a Type‑C port to charge devices conveniently.

The 2860W rating defines the maximum safe power you can draw from the cord. At 230V, that corresponds to about 12.5A, so avoid exceeding this total with any connected devices. The fused plug provides automatic protection by interrupting current if a fault or overload occurs, reducing the risk of overheating.

Yes, it suits both, but in different ways. Beginners can power laptops, lamps, and chargers from the 5‑way design and use USB ports to recharge small devices. Pros can run multiple devices and USB‑C charging for modern gadgets, so long as the overall load stays under the 2860W limit.

Keep the unit clean and dry, and inspect the 3m cable and plug for wear or damage. Avoid daisy‑chaining other cords and store it properly when not in use. Use within the rated 2860W and reserve the USB ports for charging small devices, not for high‑drain equipment. If the fuse trips, replace the fuse or the entire unit following the manufacturer’s guidance.

The two USB ports and one Type‑C port are ideal for charging smartphones, tablets, wearables, and other USB‑powered gadgets. Connect these devices directly to the USB ports while the main outlets handle laptops, lamps, and other larger loads, always keeping the total under the 2860W limit.

Plug the fused extension cord into a grounded, dry outlet and avoid outdoor use unless rated for it. Do not daisy‑chain with other extension cords, keep the cord away from heat sources and liquids, and regularly inspect for damage. Ensure the total load stays within 2860W, and if the fuse trips, replace it or the unit according to the guidance from the manufacturer.