Sell on Jumia
Filter
Brand
Dimensions for a ccs1 plug
(15 products found)
/product/99/0507704/1.jpg?1428)
/product/11/1507704/1.jpg?2124)
/product/76/0965814/1.jpg?2203)
/product/61/0404914/1.jpg?6107)
/product/11/6029914/1.jpg?3870)
/product/08/8104914/1.jpg?7873)
/product/28/8104914/1.jpg?7912)
/product/37/8104914/1.jpg?7737)
/product/50/6878291/1.jpg?8416)
/product/32/2386814/1.jpg?3752)
/product/19/9829501/1.jpg?6265)
/product/38/5215372/1.jpg?5047)
/product/20/9875814/1.jpg?3324)
/product/63/308471/1.jpg?3747)
/product/58/226468/1.jpg?6393)
Filter
Frequently Asked Questions About dimensions for a ccs1 plug
What should I consider when checking the dimensions for a CCS1 plug to ensure it fits with the EZ/EV CEE plug family components?
Start by matching the plug housing footprint and pin spacing to your enclosure. Compare the EZ/EV/EZH/EVH series from the generic brand to confirm compatible mounting patterns and overall length. Check the cable entry diameter, panel cutout requirements, and environmental ratings (IP44 or IP67) to suit your installation, noting that these series are made in EU where applicable. Use official datasheets to confirm exact outer dimensions and recommended mounting holes before purchasing.
What is the most complex attribute for the dimensions of a CCS1 plug, and how should you read pin pitch and shell depth in the EZ/EV CEE plug family?
Pin pitch and shell depth are the most complex attributes. Pin pitch is the center-to-center distance between adjacent contact pins, which determines alignment with the mating socket. Shell depth affects how far the plug protrudes into the enclosure and influences clearance and mounting. Always consult the EZ/EV series datasheets from the generic brand to interpret these values accurately, as small changes can cause misfit or poor contacts.
How would a beginner versus a professional approach choosing dimensions for a CCS1 plug?
A beginner should opt for a standard EZ/EV series with a simple mounting footprint and common panel cutouts. A professional will verify exact dimensions, tolerances, and clearance for the enclosure, including cable gland size and precise mounting hole spacing. Both should ensure the IP rating matches the installation environment and that the plug fits within the intended space. Rely on the generic brand’s EZ/EV/EZH/EVH documentation for accurate measurements.
What practical steps help ensure the CCS1 plug dimensions stay compatible after mounting?
Measure the panel cutout and compare it to the datasheet’s recommended dimensions for the EZ/EV series. Verify that enclosure tolerances won’t cause interference and that the cable entry clearance is sufficient. Confirm the IP rating aligns with the environment and that the mounting holes line up with the enclosure’s pattern. After installation, perform a light mating test to ensure smooth operation.
How can I verify CCS1 plug dimensions using product datasheets from the generic brand?
Refer to the EZ/EV/EZH/EVH CEE plug family datasheets for exact measurements, including pin spacing, shell diameter, and mounting hole patterns. Compare those figures with your equipment drawings and panel openings to ensure a precise fit. If you need clarification on tolerances, contact the supplier before purchasing. Datasheets from the generic brand are your most reliable source for dimension accuracy.
back to top