Lubcon RESURS Engine Restorer - Restoration Without Disassembling

What RESURS Engine do:

• Significantly reduces or totally eliminates oil shortage
• Prevents dry friction under high loads, overheating and cold starts
• Increases engine life if used regularly up to 2 times
• Increases compression up to 50%
• Reduces fuel consumption by 7-10 %
• Cleans exhaust gases, reduces emissions of CH by 1,5 times
• Reduces engine noise

For more info - see our website:http://new.resursmotor.com/ng/

How RESURS works:

Main active ingredient - nanopowder of cuprum, tin and silver compound gets into friction zone and creating metalplating layer on the surface of the components. He is able to smooth all metal surface defects and to improve the performance of a cylinder group and a camshaft bearings. 
RESURS doesn't change the properties of motor oil, which only used for delivering to zones of friction and wear. 
Under the high temperature and pressure, the powder particles activises and starts to restore the surfaces, firstly the damaged ones. Differently to previous generations of compounds, RESURS forms porous structure, which as a foam keeps oil on friction zone, preventing the engine parts from wearing due to cold starting or overheating the engine.The tests showed, that RESURS is prevents wear from the first seconds of engine start.The wear of a chrome rings. The width of a grooves equals to the wear. 


 Particles become a part of the main metal structure, reduces the metal fatigue and restores the surfaces by filling scratches and cracks. 





"RESURS" - is a only one from all of the simular products and mineral oils, has a metal fatigue reduce effect. That is confirmed by fact that when is RESURS was added to the oil, even on a stage of a catastrophical wear, the rate of wearing is decreases.

Indications for use:

Engine oil shortage more than 150ml per 1000km; Bluish exhaust smokes; Increased fuel consumption; Low or unequal compression; Protective effect when the milage is less than 200 000 km. 
Recovery effect when the mileage is over than 200 000 km.

Using:

1. It's better to change the engine oil and filter.
2. Warm up the engine and turn it off;
3. Mix the product with 100-200 ml of oil per 1 sachet;
4. Pour RESURS mixture into the engine oil system;
5. Run engine at idle for 10-15 min;
For the transmission - run under the load for 30 min

Dosage:

Oil value	Mileage.
	under 100 000km	100 000-200 000km	after 200 000km
3-5L	1 sachet	2 sachets	2 sachets
6-10L	2 sachets	2 sachet	3 sachets
10-12L	3 sachets	4 sachets	5 sachets