Delivery & Returns

Choose your location

Door Delivery

Ready for delivery between 1 Feb & 3 Feb when you order within next 13hrs 13mins

Pickup Station

Ready for delivery between 1 Feb & 3 Feb when you order within next 13hrs 13mins

Return Policy

Free return within 15 days for Jumia Mall items and 7 days for other eligible items.See more

Warranty

WARRANTY TERMS  PRAG INVERTERS  We provide One-year warranty on all PRAG inverters installed by us.   Faults due to voltage surge, wrong/self-installation, malicious damage, and negligence due to the customer are not covered by warranty and cost of repairs/replacement will be charged separately.   For our warranty to apply, the products must be used according to the specifications mentioned herein:   1. Service during the warranty period In the event of the occurrence of a defect for which Pragmatic Technologies Ltd is responsible during the agreed warranty period, Pragmatic Technologies Ltd will, at its options, either  Repair the defect(s) at the premises of Pragmatic Technologies or on site; or  Provide equivalent replacement (used, repaired, re-engineered and tested) or a new device.  2. Transportation  Customer shall be responsible for the transportation of the inverter to the Company’s Head Office situated at #4 Obanikoro Street, off Ikorodu Road, Via Falemi Building, Obanikoro, Lagos.  The inverters must be transported back in original or equivalent packaging.  3. Warranty Claims: Conditions   In claiming warranty; customer must bring along the invoice of purchase, receipt or delivery notes.   The serial number of the device must not be removed or cleaned off.  Any action taken in connection with warranty claims must be coordinated with Pragmatic Technologies.   In the event of replacement of a device; the remaining warranty period shall not exceed the subsisting period.  4. Scope and Validity   The warranty shall only be applicable to the inverter clearly identified by the serial number. Other installation accessories (Control Box, DC & AC cables) shall not be covered by warranty.  5. Exceptions: Any defect caused by the following circumstances shall not be covered by warranty:    Failure to comply with the load estimate, operating instructions, the installation guide and the maintenance instructions.  Faulty installation of the device.   Faulty start-up of the device.   Damage during the transportation of the device by customer.    Improper use or misuse of the device.  Insufficient ventilation of the installation area/space of the device.   Interference with the device by a third party not assigned by the Company.   FORCE MAJEURE (violent, humid environment or stormy weather, lightning, overvoltage, fire etc.).  In the event of visit for Fault/Service/Repairs (FSR) by Company’s Technician, a callout charge                         (N2, 500.00) Two Thousand Five Hundred Naira only will be paid by the customer.   Pragmatic Technologies will not be liable for compensation claims arising from poorly calibrated power input sources into the device during change of generators or mains supplies.  CHARGING WITH GENERATOR  When public power supply (NEPA/PHCN) is not available, kindly ensure you use the right type of generator to charge. Please see table below for appropriate generator capacity for your inverter model.  Inverter  Model  Minimum  Battery Bank   Recommended Battery Bank   Generator Capacity   Charging Time  PRAG 1/1.2KVA 1: 12V-150AH, 12V-200AH 1 2KVA+  8HRS + PRAG 1.45 - 2.5KVA 2: 12V-150AH, 12V-200AH 2 4KVA+ 10HRS+ PRAG 3KW/4KVA - 48V 4: 12V-150AH, 12V-200AH 8 6.5KVA+ 10HRS+ PRAG 4KVA/24V 4: 12V-150AH, 12V-200AH 6 6.5KVA+ 10HRS+ PRAG 6KW – 48V 4: 12V-150AH, 12V-200AH 8 15KVA+ 10HRS+ PRAG 10KVA – 120V 10: 12V-150AH,12V-200AH 10 20KVA+ 10HRS+   

Seller Information

PRAGMATIC TECHNOLOGIES

100%Seller Score

12 Followers

Follow

Seller Performance

Order Fulfillment Rate: Excellent

Quality Score: Excellent

Product details

Description

PRAG H-Series Pure Sine Wave Inverter / Charger

PRAG H-Series Pure Sine Wave Inverter is a combination of an inverter, battery charger and AC auto-transfer switch into one complete system with a peak conversion efficiency of 88%.

It is packed with unique features and it is one of the most advanced inverter/chargers in the market today.

It features power factor correction, sophisticated multi-stage charging and pure sine wave output with unprecedentedly high surge capability to meet demanding power needs of inductive loads without endangering the equipment.

PRAG H-Series Inverter is equipped with a powerful charger of up to110Amps (depending on model). The overload capacity is 300% of continuous output for up to 20 seconds to reliably support tools and equipment longer.

Features

  • Easy to Install & Easy to Operate & Easy to Solve
  • Designed to Operate under Harsh Environment
  • DC Start & Automatic Self-Diagnostic Function
  • Powerful Charge Rate Up to 120Amp (depending on model), Selectable From 0%-100%
  • High Efficiency Design & “Power Saving Mode” to Conserve Energy
  • 8 pre Set Battery Type Selector plus De-sulphation for Totally Flat Batteries
  • 4-step Intelligent Battery Charging, PFC (Power Factor Correction) for Charger
  • 8 ms Typical Transfer Time Between Utility & Battery, Guarantees Power Continuity
  • 15s Delay Before Transfer when AC Resumes, Protection for Load when Used with Generator
  • Battery DOD(Depth of Discharge) setting from 50% to 100%.
  • SNMP remote monitoring (available as an option)

Specifications

Inverter Output
ModelPT-INV-4KVA/3KW 24V-Color LED, Wall-H
Continuous Output Power3000W
Surge Rating(20s)9000W
Capable of Starting Electric Motor5HP
Output WaveformPure Sine wave/Same as input(Bypass mode)
Nominal Efficiency>88%(Peak)
Line Mode Efficiency>95%
Power Factor0.9-1.0
Nominal Output Voltage rms100-110-120Vac / 220-230-240Vac
Output Voltage Regulation±10% RMS
Output Frequency50/60Hz ± 0.3Hz
Short Circuit ProtectionYes, Current Limit Function (Fault after 1sec)
Typical transfer Time10ms(Max)
THD< 10%
DC Input
Nominal Input Voltage12.0Vdc
( *2 for 24Vdc, *4 for 48Vdc)
Minimum Start Voltage10.0Vdc
Low Battery Alarm10.5Vdc / 11.0Vdc
Low Battery Trip10.0Vdc / 10.5Vdc
High Voltage Alarm & Fault16.0Vdc
High DC Input Recovery15.5Vdc
Low Battery voltage recover13.0Vdc
Idle Consumption-Search Mode< 25 W when Power Saver On
Charge
Input Voltage RangeWide: 90~135VAC / 164~243VAC
Narraw: 100~135VAC / 194~243VAC
Output VoltageDepends on battery type
Charger Breaker Rating30A
Max Charge Rate30 ± 5A
Over Charge Protection Shutdown15.7V for 12Vdc ( *2 for 24Vdc, *4 for 48Vdc)
Charger curve(4 stage constant current)
4 step digital controlled progressive charge
Battery types ( *2 for 24Vdc, *4 for 48Vdc)
Battery typeFloat Vdc
Gel U.S.A13.7
A.G.M 113.4
A.G.M 213.7
Sealed Lead Acid13.6
Gel Euro13.8
Open Lead Acid13.3
Calcium13.6
De-sulphation15.5 for 4hrs
Remote ControlYes. Optional
Bypass & Protection
Input Voltage WaveformSine wave (Grid or Generator)
Nominal Voltage230Vac
Low Voltage Trip184V/154V±4%
Low Voltage re engage194V/164V±4%
High Voltage Trip253V±4%
High Voltage re engage243V±4%
Max Input AC Voltage270VAC
Nominal Input Frequency50Hz or 60Hz (Auto detect)
Low Freq Trip47±0.3Hz for 50Hz, 57±0.3Hz for 60Hz
Low Freq re engage48±0.3Hz for 50Hz, 58±0.3Hz for 60Hz
High Freq Trip55±0.3Hz for 50Hz, 65±0.3Hz for 60Hz
High Freq re engage54±0.3Hz for 50Hz, 64±0.3Hz for 60Hz
Output Short circuit protectionCircuit breaker
Bypass breaker rating30A
Transfer switch rating40amp for UL
Max bypass current40amp
Mechanical Specification
MountingWall mount
Inverter Dimensions(L*W*H)598*218*179mm
Inverter Weight35KG
Shipping Dimensions(L*W*H)740*315*300mm
Shipping Weight37KG
DisplayStatus LEDs / Status LEDs+LCD

Specifications

Key Features

FeaturesEasy to Install & Easy to Operate & Easy to SolveDesigned to Operate under Harsh EnvironmentDC Start & Automatic Self-Diagnostic FunctionPowerful Charge Rate Up to 120Amp (depending on model), Selectable From 0%-100%High Efficiency Design & “Power Saving Mode” to Conserve Energy8 pre Set Battery Type Selector plus De-sulphation for Totally Flat Batteries4-step Intelligent Battery Charging, PFC (Power Factor Correction) for Charger8 ms Typical Transfer Time Between Utility & Battery, Guarantees Power Continuity15s Delay Before Transfer when AC Resumes, Protection for Load when Used with GeneratorBattery DOD(Depth of Discharge) setting from 50% to 100%.SNMP remote monitoring (available as an option)

What’s in the box

InverterCablesManual

Specifications

  • SKU: PR964HL09E1YENAFAMZ
  • Area of Use: Living Room|Home Office|Entry & Hallway
  • Style: Modern
  • Care Label: <b>&nbsp;Please install in a cross ventilated area, no direct fire, do not immerse in water</b>
  • Certifications: Eco Friendly
  • Color: Blue
  • Main Material: Metal
  • Model: WALL MOUNT H
  • Production Country: China
  • Product Line: Prag
  • Size (L x W x H cm): 32*33*60
  • Weight (kg): 29

Customer Feedback

See All

Product Ratings (3)

4.7/5
4.7 out of 5

3 ratings

Product Reviews (0)

This product has no reviews yet.

Prag 4KVA 24V Pure Sine Wave Inverter With AC/DC Cables (Blue)

Prag 4KVA 24V Pure Sine Wave Inverter With AC/DC Cables (Blue)

₦ 288,100

Recently Viewed

See All