POWLSOJX 60A 40A 30A Solar Controller - Massive Aluminum Heat Sink - 12V/24V Heavy Duty PWM Regulator for LiFePO4

POWLSOJX XR Series Solar Charge Controller – Built for Durability & Lithium Ready

Are you looking for a solar controller that can handle the Nigerian heat? Do you need to charge modern Lithium batteries safely? The POWLSOJX XR Series (10A-60A) is your reliable solution. Unlike basic controllers that overheat or damage batteries, the XR series combines industrial-grade design with intelligent software to protect your expensive solar system.

1. True Lithium Battery Support (LiFePO4 Ready) Don't risk your expensive batteries with cheap controllers! The XR Series allows you to manually select your battery type in the menu:

b01: Lead-acid / Sealed / Gel (12V/24V Auto)

b02: Lithium-Ion (3s 11.1V)

b03: LiFePO4 (4s 12.8V)

You can even customize the Charge and Cut-off voltages to match your specific battery .

2. Heavy-Duty Cooling Design (Exclusive to 40A/50A/60A) Heat is the enemy of electronics.

10A-30A Models: Compact and efficient for small lighting systems.

40A-60A Models: Equipped with a Massive "Cooling Backplane". This thick aluminum heat sink ensures the controller runs cool and stable, even when handling high currents (up to 60A) under the hot sun. Perfect for expanding your home system without buying expensive MPPTs.

3. Visual Management with Big LCD The intuitive large screen shows you everything you need to know at a glance:

PV Input Voltage & Charging Current

Battery Voltage & Temperature

Load Current & Output Mode

4. Intelligent Load Control Automate your DC appliances with built-in timers:

[24H]: Always On (for freezers/fans).

[0H]: Dusk to Dawn (Automatic street light).

[1-23H]: Turn on at night, turn off after X hours.

SPECIFICATIONS:

Rated Current: 10A / 20A / 30A / 40A / 50A / 60A (Choose variant)

System Voltage: 12V / 24V Auto-identification

Max PV Input Voltage: < 50V

USB Output: 5V / 2A-2.5A Max

Standby Current: <10mA

Working Temperature: -35°C ~ +60°C

???? IMPORTANT INSTALLATION GUIDE (READ BEFORE USE) ???? To prevent damage to the controller, please strictly follow this sequence:

STEP 1 (BATTERY): Connect the Battery to the controller FIRST. The screen must turn on.

STEP 2 (SOLAR): Connect the Solar Panel to the controller SECOND.

STEP 3 (LOAD): Connect your DC Load (Bulbs/Fan) LAST.

DO NOT connect an Inverter to the controller's "Load" side. Connect Inverters directly to the Battery!

DO NOT use a DC Power Supply to simulate solar input.

Package Content:

1 x POWLSOJX Solar Charge Controller

1 x User Manual (English)