Kamisafe Solar Power Mobile Home Lighting Kits,5000mAh Lithium Battery,Charges Other Electronic Devices.With 3PCS Bulb And Solar Panel

Perfect Match/More Lighting Solutions

KM-6770 Desk Lamp	KM-7778 Rechargeable Emergency Light	KM-7777 Rechargeable Emergency LED Work Light	KM-7657 Multifunctional Rechargeable LED Hand Lamp

PRODUCT CHARACTERISTICS 

1. Built-in 7.4V lithium battery safe, no pollution,no memory, with high capacity to 5000mAH; 

2. Built-in circuit with charging status indicator, 4 level power indicator (25%, 50%, 75%, 100%) function, which is intuitive and practical; 

3. Equipped with five DC output power cord, the product has discharge, overcurrent and short circuit protection function; It can connect many energy saving bulbs at the same time; The product also has one DC input port for power charger input charging and also can use solar panel charging input; 

4. Equipped with energy-saving, environmental poly-crystalline silicon solar panel with high conversion efficiency; 

5. Attached with super bright LED lighting, with independent LED switch to control strong and weak light; The light source adopt green environmental and super bright white SMD LED, Low power consumption; the strongest light of 20pcs SMD only consume 2W, the weak light only consume 0.7W and can work over 40h; 

6. Equipped with 3pcs 3W LED energy-saving bulbs, the light source adopt green environmental and super bright white SMD LED, Low power consumption, the 3 bulbs can work 8h at the same time; 

7. Attached with USB output charge function, its inner circuit has discharge, overcurrent and short circuit protection function; with good compatibility and high output efficiency characteristics, the lamp can meet all kinds of digital products to charge and discharge, like different brands of cellphones, or Ipad, MP3,PDA,MP4,MP5 and game console. It can set according to different brands, model and operation mode. 

8. Various electricity display functions make the product more energy saving and environmental protection. 

9. Products have automatic sleep function, it will automatically turn off when the product is off-load in five consecutive minuets to better save energy,

10. The product has best quality and price, quick charge, stable and reliable, safe and green environmental protection; 

11. This product is easy to carry and applicable to a wide range. It can be used as an emergency lamp in the case of sudden power failure, and can also charge digital products

INSTRUCTIONS TO USE 

1.When charging, insert AC plug of charger into the AC110-240V/50-60Hz power source socket, the red indicator light of charger is on, then insert the DC plug of the charger into the product DC input socket, the relevant charging indicator light is on; when the indicator light changes into green, it indicates the product is full power and it takes about 10 hours for the full charge(no power indicator function when charging); 

2.When use solar panel charging, put the solar panel face towards sun, then insert DC plug into product DC input port and the product indicator light will be red; when the red light turn into green, it indicates full power for product(no power indicator function when charging); 

3.Long press the button of the total power switch on the product to switch the total power of the product, After the total power is turned on, 1 to 4 of the red light (25%, 50%, 75%, 100%) will shine intermittently to display the power After the product is shut down: short press the total power switch button on the product, 1 to 4 red indicators (25%, 50%, 75%, 100%) will show the current power for a short time. 

4.After the general power switch is turned on, press the button on the product for the first time. The product is equipped with LED light weak lighting, and the button on the product for the second time is equipped with LED light strong lighting. Press the button on the product for the third time and turn off the LED light. Repeat! 

5.The product configuration has two USB output ports. Before using USB output for charging, insert one end of the USB power cord into any USB port of the product and the other end into the digital product to be charged. Open the total power switch on the product, the USB port is in the state of output charging, and the corresponding power indicator light (25%, 50%, 75%, 100%) on the product is intermittently shiny. 

6.The product configuration has five DC output ports. Before using energysaving bulb for lighting, plug the DC plug of the power cord of energy-saving bylb into the DC output port of the product, turn on the total power switch of the product, turn on the energy-saving bulb, and the corresponding power indicator light (25%, 50%, 75%, 100%) is flickering intermittently.