Kami Tactical Security Powerful Aluminum Waterproof Flashlight,3000mAh,Up to 8-Hour Runtime,With Premium 6061 Aerospace-grade Aluminum Alloy,Gift Box Packing

PRODUCT INSTRUCTIONS 

1.When charging this product, first remove the silicone protective sleeve from the product, then connect the end of the USB cable with the TYPE-C plug to the product, and plug the other end into a nominal DC 5V power adapter with a USB output port (5V/1A or above charger is recommended)), at this time the red light at the button is on, when the indicator light at the button is green, it means that the product is fully charged; it takes 4-5 hours for the product to be fully charged. 

2.There are two ways to turn on the lighting. 

Mode 1: The first time you press the switch, LED strong light illumination, the second time you press the switch, LED weak light illumination, the third time you press the switch, LED stop lighting. If you continue to press the switch, the LED lighting from the strong light, weak light, turn off the cycle, until you choose their own needs of luminosity until (in the LED light, the button at the indicator will correspondingly light green). 

Mode 2: the first double-click switch, LED burst flash, the second double-click switch, soS rescue signal indication, such as continue to double-click the switch, the LED lighting from the burst flash, Sos rescue signal cycle in turn, until you choose your own needs of the luminosity, press the switch to turn off the lighting. 

Mode 3: Strong light/weak light illumination state, long press the switch, the light brightness gradually decreases, the light brightness reaches the minimum brightness after flashing 2 times to stop changing, long press the switch again the light brightness reaches the maximum brightness after flashing 2 times to stop changing.When released, the brightness of the light stops at the brightness corresponding to the time of release, and cycles in turn.