Kami Rechargeable Lithium Head Light,2600mAh, 12Hrs Runtime,Super Bright Laser-Core Headlamp, Frosted Housing,Bionic Lens,Telescopic Zoom,For Night Fishing＆Resource Extraction

Perfect Match/More Lighting Solutions

KM-6770 Desk Lamp	KM-7778 Rechargeable Emergency Light	KM-7629U Rechargeable LED Emergency Lamp	AF-KM8081 Aluminum Waterproof Flashlight
KM-7781 Rechargeable Table Light	KM-7777 Rechargeable Work Light	KM-7657 Rechargeable Hand Lamp	AF-TB510 Rechargeable LED Emergency Light Bulb.With Solar Panel

Product features
1.The product build-in 3.7V lithium battery which is safe, pollution-free, memory-less with rated capacity to 2600mAh. 
2.The light source is a green, high-brightness laser LED, low energy consumption, and the working time is up to 13
hours;
3.The product uses MCU control, press the switch, you can freely choose the functions of strong light, weak light and flash light, then make better use of energy according to environment ;
4.The product is equipped with TYPE-C socket for charging. You can use the mobile phone charger or the adapter with USB output port to charge the product easily.
5.The product can freely adjust the focus by stretching the lamp holder to achieve the best use effect. It is a telescope head lamp; 
6.Flashing lights can be used for remote signal indication;
7.The product lens adopts Fresnel lens, which has high light transmittance and good light gathering effect;
8.The product is equipped with a head strap, the lamp head Angle is 0-70 degrees adjustable, this product is a high-quality emergency lighting tool suitable for various patrols, emergency relief, petroleum, petrochemical, gas maintenance, industrial and mining enterprises, exploration, outdoor leisure, and emergency work in the wilderness.

Product instructions
1.When in use, press the button for strong light, press the second time for weak light, press the third time for flashing, press the fourth time to stop lighting, and cycle in turn (When the LED lights up, the key will also light up);
2.Step-less dimming function: In the lighting state, press the button and hold it for more than 2 seconds, the brightness of the light will gradually change from high brightness to low brightness, and then change from low brightness to high brightness. It cycles, when the button is released, the brightness of the light will stop at the corresponding brightness at the moment of release.;
3.Before charging the product, please turn off the LED light, and then insert the charger with USB output port (recommend 5V1A charger) plug into an AC power outlet, and connect the other end of the USB cable with TYPE-C with the product, the corresponding power indicator of the lamp flashes. The green indicator light flashes during charging and the green indicator light is on in full charge. It takes about 4-5 hours for the product to be fully charged;