Ingco ELECTRIC FLOOR BASE HVLP PAINT SPRAYING GUN 550W

The device works according to low pressure spraying technique. A high volume of air surround the spray jet being ejected under low pressure. The air cap provides a very fine atomization with the lowest of spray mist. The coating material is applied to the object quickly and exactly. Moreover, the airflow shortens the drying time for the coating material. This gives perfect spraying result with a respective saving of coating material and is therefore good for the environment.Materials which can be usedSolvent containing and water-dilutable enamel paints, varnishes, primers,two-component paint, clear enamels, motor vehicle enamels, mordants and wood preservatives.Materials which cannot be usedWall paints (emulsions) etc., lyes and acid coating materials.Power500WMax Flow850ml/minSpraying Pressure0.1 - 0.2 barMax Viscosity50 DIN-sContainer Capacity800ml Viscosity TableCoating material viscosity DIN-SSolvent-base paints15-50Primer25-50Picklingundiluted2 Kompnenten paint20-50Vernishes15-40Waterborne paints20-40Automotive topcoats20-40Wood preservativesundilutedThe device works according to low pressure spraying technique. A high volume of air surround the spray jet being ejected under low pressure. The air cap provides a very fine atomization with the lowest of spray mist. The coating material is applied to the object quickly and exactly. Moreover, the airflow shortens the drying time for the coating material. This gives perfect spraying result with a respective saving of coating material and is therefore good for the environment.