Share this product

Solar Charger Controller 12V / 24V Rated Current 20A

₦ 8,500

In stock

+ shipping from ₦ 1,700 to LEKKI-AJAH (SANGOTEDO)

0 out of 5

(No ratings available)

Variation available

n/a

3offers starting from₦ 8,500

Delivery Fees ₦ 1,700

Ready for pickup between 21 September and 22 September if you place your order within the next 15hrs 33mins

Delivery Fees ₦ 2,750

Ready for delivery between 21 September and 22 September if you place your order within the next 15hrs 33mins

Free return within 7 days for ALL eligible itemsDetails

monee superstore

78%Seller Score

165 Followers

Shipping speed: Good

Quality Score: Average

Customer Rating: Average

Cancellation Rate: Excellent

₦ 8,800

Sold by: lade luxury world | Seller Score: 74%

₦ 9,500

Sold by: goodluck supermarket | Seller Score: 74%

Product connection mode
1. Connect the positive and negative electrodes of the livestock battery into the controller according to the diagram, and the controller will automatically detect the voltage of the livestock battery.
2. Connect the positive and negative poles of the load into the controller according to the diagram, and be careful not to connect them in reverse.
3. Connect the solar panel to the controller as shown in the figure.
Note: please connect in strict accordance with the above order, otherwise the controller may be damaged,
The disassembly sequence is opposite to the wiring sequence.
Setting parameters
In the interface 2-5, long press the up key for 5 seconds to restore the default value.
Press and hold the menu key for 5 seconds to enter the manual setting. At this time, the number will flash,
Press the up and down keys to adjust the parameter value, and then press the menu key for 5 seconds to exit the setting.

Product connection mode
1. Connect the positive and negative electrodes of the livestock battery into the controller according to the diagram, and the controller will automatically detect the voltage of the livestock battery.
2. Connect the positive and negative poles of the load into the controller according to the diagram, and be careful not to connect them in reverse.
3. Connect the solar panel to the controller as shown in the figure.
Note: please connect in strict accordance with the above order, otherwise the controller may be damaged,
The disassembly sequence is opposite to the wiring sequence.
Setting parameters
In the interface 2-5, long press the up key for 5 seconds to restore the default value.
Press and hold the menu key for 5 seconds to enter the manual setting. At this time, the number will flash,
Press the up and down keys to adjust the parameter value, and then press the menu key for 5 seconds to exit the setting.