PH Meter & TDS Meter Digital Water Quality Tester

PH Meter & TDS Meter Digital Water Quality Tester 0-14 PH Meter Tester 0-9990PPM TDS&EC LCD Water Purity PPM Aquarium Filter

• I am an international seller

Our shop sells the most popular 3C consumer electronics products,such as mobile phone accessories,computer accessories,game peripherals,smart wearables,and follow the most popular fashion trends. If you like our products,please follow us,become our follower and fan.We will provide you with the most popular products to satisfy your fashion shopping experience.

PH Meter & TDS Meter Digital Water Quality Tester 0-14 PH Meter Tester 0-9990PPM TDS&EC LCD Water Purity PPM Aquarium Filter



Pls note：All not included the Batteris!




PH tester:

Product Features

Easy to Use: Simply immerse the pH meter electrode in the solution to be tested, readings are quickly display on a large lcd display

Wide Application: Ideal instrument for any aquarium, the fishing industry, swimming pools, spa, school laboratories, food & beverage, drinking water etc.

Auto Calibrated:Features in-built calibration with 2 buffer powders.Just press a on to finish the calibration. This pH meter is factory calibrated. Users can use it directly.

Fast and Accurate Results: No need to work with those annoying color charts and test strips.Resolution: 0.01 pH, Accuracy: ±0.01 pH

Compact Portable Design: Pocket fitting pH meter that's also lightweight and compact. Total concealed fit in your bag or pocket for easy, casual carrying.




Product Descriptions

~Key Features~

Display: LCD Digital

Accuracy: 0.01

Resolution: 0.01

Operating Temperature: 0~60°C

Measuring Range: 0.00~14.00

Power source: 2 x 1.5 V(LR44 on Cell)(not included)

Operation:

Step 1.Remove protective cap.

Step 2.First rinse the electrode with distilled water and suck it with filter paper.

Step 3.Turn the meter on by pressing “ON/OFF” key.

Step 4.Immerse the pH meter electrode in the solution to be tested (should not be over the immersion line).

Step 5.Stir gently and wait around 30 seconds till the reading stabilizes.

Step 6.After finishing, clear the electrode with pure water, turn the meter off by pressing “ON/OFF” key.

Step 7.Always replace the protective cap after use.





Calibration：

1.Turn on PH meter

2.Disolve each buffer solution in 250ML of distilled water

3.Immerse the electrode into the PH 6.86 solution,(under the temperature of 25)

4.Press the “CAL”(calibration)on for 5 seconds and release

-Display will start flashing 6.86

-Wait until the display stops flashing.

Rinse the electrode with distilled water and dry it with filter paper.

5. Immerse the electrode in PH 4.00 solution,

-Press“CAL”on for 5 seconds,then press and release immediately second time

-Reading will start flashing 4.00

-Wait until display stops flashing

Rinse and dry the electrode with distilled water as before.

6.Place the meter back to the buffer solution to test calibration.If incorrect,please repeat the calibration

7.If approximate PH of your test solution is known to be above 7.0,calibrate the meter using 6.86 and 9.18 solution. To do this,please follow the calibration chart,The third step is the calibration method for 9.18 point.




Kindly Reminder:

If the tester was used or lay aside length time: recalibrate it.

If you open battery case or replace battery: recalibrate it.

The glass bulb of the electrode is fragile. Don't touch it by hard tools and fingers, suck the water on it gently when cleaning.

package included:

1) 1pcs pH Meter

2) 2 Bags Buffer Powder(4.00/4.01,6.86)

3) Instruction Manual

EC Tester:

Provides accurate and reliable test readings
3-In-1 Digital TDS meter provides accurate readings for TDS (Total Dissolved Solids) EC (Electrical Conductivity) and temperature. Professional, Accurate, and Precise 3-in-1 TDS, EC, and Water Temperature Meter. The TDS meter has automatic temperature compensation in measurement mode. 9 minutes no operation, the meter will automatically shut down. Save power, extend battery life
1. Multi-mode conversion: TDS EC meter instrument a total of 4 different modes, press the SHIFT key can be converted between different modes. Mode memory function, each boot mode is the default mode used before the shutdown
2. Locks your reading making it easy to record: Large, easy to read LCD screen and data-hold function makes reading and recording a snap. “HOLD” automatic locking, “SHIFT” automatic conversion, 5 minutes Automatic locks.Press the SHIFT key while the value is locked to view the measurement results for the different modes. The measurement time is rapid, due to the exquisite naked type sensors, 5 seconds complete
3.Pocket Size: TDS meter is a professional water level test instrument, the operation is simple, the appearance of fashion, small size and easy to put in your pocket! For today's market volume is the smallest, lightest portable. Reasonable design, pen electrode can be directly inserted into the water solution, measured it.Compact size that enable you to take anywhere
4.Widely Use: Ideal for all water quality testing, water purification applications, waste water regulation, aqua culture,hydroponics, laboratory and scientific testing, pools, ecology testing, colloidal silver, water treatment and more
Product description
Color:White
1. A professional level water test meter combinates with TDS Meter, TDS EC Meter and Temperature Meter. For accuracy and reliability choose the DOY 3-in-1 TDS Meter.
2. The water that flows from our taps is full of chemicals, pollutants and metals. Well, the only way to make sure your water is clean and healthy is to test it regularly. With this TDS tester you can check any time on your water filtration, ensuring that you and your family won't be exposed to unhygienic drinking water.
3.A versatile tool that saves you money while providing the best for your health!
Features
1. Lock function: makes it easy to read and record, press HOLD on then remove from test solution.
2. 4 Display modes: press SHIFT on: TDS - ppm & °C, EC - μs/cm & °C, TDS - ppm & °F, EC - μs/cm & °F.
3. 5 minute Auto Shut Off feature, so battery won't run down.
4. Measurement Range: ?Conductivity: 0 - 9999?μs/cm
TDS: 0 - 9999?ppm (parts per million)
Degrees Celsius: 0.1 - 80.0°C
Fahrenheit: 32.0 - 176.0°F
5. Accuracy: ± 2%
6. Net weight: 55g
7.Supply voltage:CR2032 battery, DC3V; 230mAh.(Not included)
How to use
▼ STEP 1: Remove the electrode protective cap before use
▼ STEP 2:Press the ON/OFF on, and immerse the meter into the solution. (The solution should not over the immersion line)
▼ STEP 3: After the numerical display is steady, press the HOLD on and take it out of the solution for checking the result
▼ STEP 4: Wipe clean the electrode after using, turn off the meter and replace the protective cap
NOTE
Please read the manual carefully before using the TDS meter!!!
Keep the electrode clean.Always close the electrode protective cap.
Please take out the batteries for length periods unused.
EC meter?has two styles, White Blue Optional





CE Certificate for PH tester






































?size=176108&height=983&width=696&hash=c8f794f52b02afec6f38cdba9786dfba


?size=158321&height=930&width=704&hash=063d2b1c96877dd9d079a5a79e6b758c