Electric Chargeable Hair ClipperPowerful motorCord/cordless8 hours safety charge PREPARING FOR USE 1. The appliance as supplied by the manufacturer is not yet ready for use.lt must be electrically charged prior to use. 2. Insert the plug of the battery charging stand 4 into a socket Warning! This appliance must be charged at the specified voltage! You can store the remainder the charging stand 4 (110-240V 50Hz/60Hz). In order to charge the appliance it should be placed in the battery charging stand 4 so that the control lamp 5 lights up. While the appliance is being charged, the switch must be set at "0" (the "0" must be visible). A charging period of 16 hours is required before initial use. Take care to keep the charging contacts 3 clean, as soiled charging contacts can interfere with the charging process. Overcharging of the appliance is not possible. 3. After charging the appliance is ready for use. It can be used with or without the cilp-on comb attachment. To attach the clip-on comb attachment, slide it onto the cutting head 1 until it clicks into position. The appliance must be switched off while the clip-on comb attachment is being attached or removed. 4. The clip-on comb attachment is easily adjustable. Simply slide it up or down the cutting head 1. The hair can be cut to 4 different lengths ranging from approximately 3 mm to 6 mm. The position of the clip-on comb attachment on the cutting head determines the length of the haircut 5. After using the appliance, switch it off and replace it in the battery charging stand 4 to be recharged the control lamp 5 must light up. In order to retain the load capacity of the storage battery we recommend to use the storage battery until it is empty before reloading.