This website uses cookies
This website uses cookies. For further information on how we use cookies you can read our Privacy and Cookie notice
HomeToys & GamesToy Remote Control & Play VehiclesPlay Trains & Railway SetsAccessoriesDebugging Board Futaba SG90 Servos Etc Center Return Meter
/product/13/8371604/1.jpg?0819)
/product/13/8371604/2.jpg?0819)
/product/13/8371604/3.jpg?0819)
/product/13/8371604/4.jpg?0819)
/product/13/8371604/5.jpg?0819)
/product/13/8371604/6.jpg?0819)
/product/13/8371604/7.jpg?0819)
Share this product
₦ 23,696
₦ 44,53947%
3 units left
+ shipping from ₦ 5,097 to LEKKI-AJAH (SANGOTEDO)
0 out of 5
(No ratings available)Promotions
Delivery & Returns
Shipped from abroad
Choose your location
Pickup Station
Delivery Fees ₦ 5,097
Ready for pickup between 26 May and 28 May if you place your order within the next 10hrs 56mins
Door Delivery
Delivery Fees ₦ 5,857
Ready for delivery between 26 May and 28 May if you place your order within the next 10hrs 56mins
Return Policy
Free return within 7 days for ALL eligible itemsDetails
Warranty
None
Seller Information
Sunnyshy
90%Seller Score
163 Followers
Seller Performance
Shipping speed: Good
Quality Score: Excellent
Customer Rating: Good
Product details
Detailed Information About The Product:
Onboard STM32 is Used to Generate High-Resolution PWM Signals for Precise Control;
Support Manual Mode and Back to Center Mode, Switch By Key, with Mode Indicator; Each Servo Interface Has A Self-Recovery Fuse to Prevent Excessive Current Burnt Servo;
Manual Mode Support Knob Adjustment Control; Power Supply Voltage Range: 5-9v (Specific to the Actual Servo Power Supply Voltage Shall Prevail);
The Number of Control Channels: 8-Way; Can Be Directly Used 2S Lithium Battery Charging Head Debugging and Back to the Center Servo;
Servo Control Accuracy: 0.09 Degrees (That Is, the Minimum Change in Pwm Value of 1 Us); Support for the Control Period of 20ms, Pulse Width in the 0.5-2.5ms Range of the Servo (Such As Futaba, Huisheng, Etc.);
Description:
The Servo is A Power-Consuming Device and Consumes A Lot of Power, So the Power Supply Must Have Sufficient Current. If the Power Indicator Blinks, the Servo Rotation is Not Controlled, or the Error is Obvious, It Means That the Power Supply is Insufficient, and It is Necessary to Replace the Power Supply.
1. About Wiring
Vcc, Gnd Connected to the Power Supply, the Servo Will Be Inserted in the 2x3p Row of Pins, Where Vcc is the Positive Pole, Gnd is the Negative Pole, S is the Signal Terminal.
2.Manual Mode
Select Manual Mode Through the On-Board Button, At This Time the Manual Light is On, the Center Light is Off. Manual Mode Includes Knob Control
2.1 Knob Control:
Directly Turn the Potentiometer to Control the Servo in the Range of 0-180°.
3. Center Return Mode
Select the Return to Center Mode Through the On-Board Button, Then the Manual Light Will Be Off and the Center Light Will Be On, and the Servo M0 and M1 Will Return to the Center At the Same Time.
size: 100 x 55mm
Material: PCB
colour: As shown
Package Contents:
1x Eight-Way Knob Servo Module
Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Onboard STM32 is Used to Generate High-Resolution PWM Signals for Precise Control;
Support Manual Mode and Back to Center Mode, Switch By Key, with Mode Indicator; Each Servo Interface Has A Self-Recovery Fuse to Prevent Excessive Current Burnt Servo;
Manual Mode Support Knob Adjustment Control; Power Supply Voltage Range: 5-9v (Specific to the Actual Servo Power Supply Voltage Shall Prevail);
The Number of Control Channels: 8-Way; Can Be Directly Used 2S Lithium Battery Charging Head Debugging and Back to the Center Servo;
Servo Control Accuracy: 0.09 Degrees (That Is, the Minimum Change in Pwm Value of 1 Us); Support for the Control Period of 20ms, Pulse Width in the 0.5-2.5ms Range of the Servo (Such As Futaba, Huisheng, Etc.);
Description:
The Servo is A Power-Consuming Device and Consumes A Lot of Power, So the Power Supply Must Have Sufficient Current. If the Power Indicator Blinks, the Servo Rotation is Not Controlled, or the Error is Obvious, It Means That the Power Supply is Insufficient, and It is Necessary to Replace the Power Supply.
1. About Wiring
Vcc, Gnd Connected to the Power Supply, the Servo Will Be Inserted in the 2x3p Row of Pins, Where Vcc is the Positive Pole, Gnd is the Negative Pole, S is the Signal Terminal.
2.Manual Mode
Select Manual Mode Through the On-Board Button, At This Time the Manual Light is On, the Center Light is Off. Manual Mode Includes Knob Control
2.1 Knob Control:
Directly Turn the Potentiometer to Control the Servo in the Range of 0-180°.
3. Center Return Mode
Select the Return to Center Mode Through the On-Board Button, Then the Manual Light Will Be Off and the Center Light Will Be On, and the Servo M0 and M1 Will Return to the Center At the Same Time.
size: 100 x 55mm
Material: PCB
colour: As shown
Package Contents:
1x Eight-Way Knob Servo Module
Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Specifications
Key Features
- Steering Gear Controller
- Debug Board
- Gyroscopic Instrument
- Debug Board Controller
- Controller
What’s in the box
1 x Eight-Way Knob Servo Module
Specifications
- SKU: GE779TG6UDYSONAFAMZ
- Model: Steering Gear Controller
- Production Country: China
- Size (L x W x H cm): 15×10×2
- Weight (kg): 0.069
- Color: As Shown
- Main Material: PCB
Verified Customer Feedback
Customers who have bought this product have not yet posted comments
/product/13/8371604/1.jpg?0819)
Debugging Board Futaba SG90 Servos Etc Center Return Meter
₦ 23,696
₦ 44,53947%
Questions about this product?