Car V310 OBD2 Auto Scanner Code Reader & Brake Oil Fluid Tester

Code Reader V310 Features & Functions:

1. Support Multi-brand cars, works with all 1996 and later OBDII compliant US, European and Asian vehicles.

2. Multi-language supported: English, French, Italian, Spanish, German, Dutch.

3.Supporting shortcut key queries.(VIN,DTC)

4.Support Read/Clear diagnostic trouble codes,I / M readiness,Vehicle InFo,turn off the MIL ("Check Engine" light) an so on.

5. Display current sensor data, including:

6. Engine RPM

7. Calculated Load Value

8. Coolant Temperature

9. Fuel System Status

10. Vehicle Speed

11. Short Term Fuel Trim

12. Long Term Fuel Trim

13. Intake Manifold Pressure

14. Timing Advance

15. Intake Air Temperature

16. Air Flow Rate

17. Absolute Throttle Position

18. Oxygen sensor voltages/associated short term fuel trims

19. Fuel System status

20. Fuel Pressure

AND Many others...

Multi-Protocol Support

The brake fluid tester;

The brake fluid tester is suitable for determining brake fluid quality.Brake Fluid Tester is according to the variation of electrical conductivity to determine the moisture content of the brake fluid change.It through the light-emitting diodes clearly shows the degree of moisture. High content moisture will reducing the boiling point, and then affect the braking performance. Red indicates brake fluid need to be replaced immediately, green indicates brake fluid in good condition, yellow indicates brake fluid stays good, but is going to change.

Directions for using:5 LEDs indicating the water % in the brake fluid :0% LED:there is on water content in brake fluid1% LED: Water Content, H2O≤1%, brake fluid  is above standard2% LED: Water Content, H2O≤2%, still can use it3% LED: Water Content Water Content, H2O≤3%, brake fluid should be changed4% LED: Water Content Water Content, H2O≥4%, brake fluid must be changed
Packing List:1 x Brake fluid tester