Animal Estrus Ovulation Tester Fox Breeding Instrument

Feature:

1. Arc Probe: The probe is smooth, and the size is customized according to the characteristics of the animal to reduce the interference to the animal during pregnancy.
2. Animal Ovulation Tester: The animal estrus and ovulation tester is convenient to grasp the accurate breeding timing and improve economic benefits
3. Waterproof Switch: The switch button is protected by a rubber cover, which is easy to use and located on the underside of the handle.
4. Large Screen Display: Automatic display, accurate data, digital display, digital intuitive. Removable battery, hanging hole design, user friendly,
5. Good Features: Easy to clean, waterproof setting, safety guarantee, scientific breeding, high calving rate, suitable for farm and veterinary.

Specification:

Item Type: Ovulation Meter
Material: Polyethylene
Color: As Pictures Shown
Weight: Approx. 1275g / 2.8lb
Working Tmperature: 0-50℃
Maximum Humidity: 85%
Measuring Range: 10-1990
Test Method: One Test
Test Speed: Within 2 Seconds
Display: LCD Screen
Product Size: Approx. 22x17x7cm / 8.7x6.7x2.8in
Product Use: Detect fox estrus breeding time, body waterproof, increase litter size
Battery: 1 9V High Performance Carbon Battery, 6F22 Model(Shipped Without Battery)

Kind Tips:
1. It is recommended that you do not lend the analyzer to reduce the risk of the spread of infectious diseases.
2. Strictly follow the disinfection procedures.
3. Dry the analyzer and store it at room temperature.
4. It is strictly forbidden to use overheated or boiling water to clean the analyzer.
5. Dirt, sebum oil, urine, and saline solution on the electrodes will cause false results.

Data Judgment: A graph showing fluctuations in vaginal mucus resistance is automatically generated and indicates the optimal mating time.
Usually in practice, this curve and the highest peak of the curve will vary from animal to animal. Therefore, breeders should adjust the graph according to their own experience and individual differences in female foxes.
For some female foxes, the peak of the curve may reach 400 units, or 600, 750, or even 1000. At this time, it must be remembered that this is a cross‑sectional area graph and not an actual data value.
The following steps are recommended:
Daily measurements are not required when data values ​​are in the 100‑200 units.
When the data value rises above 200, it must be measured every day. Sometimes there is a noticeable rise after this level has been maintained for a few days.
When the data value starts to rise, it is recommended that you measure more frequently (such as 2.3 or 4 times a day) to more accurately determine the time of ovulation. For example, measurements can be made at breakfast time, lunch time, afternoon and dinner time. This is especially important for some female foxes who ovulate early or only receive mating for a limited period of time.

.wang-edit-text{
font-family:'Arial' !important;
}
.wang-edit-text table {
border-top: 1px solid #000;
border-left: 1px solid #000;
}
.wang-edit-text table td,
.wang-edit-text table th {
border-bottom: 1px solid #000;
border-right: 1px solid #000;
padding: 3px 5px;
}
.wang-edit-text table th {
text-align: center;
}

Package List:

1 x Ovulation Meter

1 x Storage Box

1 x Manual

Note:

Another function of the LCD screen is to read the remaining power of the battery. When "Lobat" appears on the screen, it means that the instrument has no power, and the battery needs to be replaced.Battery replacement method:1. Unscrew the screw at the bottom of the handle;2. Remove the battery from the handle and release the battery from the battery clip3. Replace the new battery and put it back in the handle;4. Fasten the battery cover and tighten the screws.Cleaning:The analyzer should be cleaned before and after use.Careful and thorough cleaning can ensure the correct use of the instrument. It is recommended that you take a cotton cloth or towel and put it on the detergent, wipe the probe and probe repeatedly, and then rinse with clean water. Do not dry it after rinsing, because the water The beads will not affect the test results, but the probe will cause a second contamination during the drying process. In addition, it must be re‑cleaned by the cleaning method in the manual at that time, otherwise it will affect the data and the service life of the equipment.Before measuring each female animal, be sure to repeat the above operation to clean the instrument, not only to obtain the best and accurate data, but also to avoid cross infection between mothers.After each use, please clean the ovulation meter and put it back in the carton.