Focustar 150W 144WH Portabl Power Station Outdoor Mobile Power Emergency Power With LCD Light

Pr ecautions for use：

1. Open the package and check whether the following accessories are complete

1*Portable Power Station; 1*AC Adapter Charger; 1*User Manual; 1*Qualified Certificate;

2. The portable power station device should be placed in a well-ventilated place away from water, flammable gases and

corrosive substances.

3. Do not place it on its side, keep the bottom and panel of the portable power station uncovered.

4. The panel temperature and the working environment temperature of the portable power station should be kept

between 0~40℃.

5. If the portable power station device is disassembled and used at low temperature, water condensation may occur. It

must be used until the inside and outside of the device are completely dry, otherwise there will be a danger of electric

shock.

Points for attention:

The portable power station device has high voltage AC output, which is potentially dangerous and must be handled with

care and kept away from children, otherwise there will be a risk of electric shock.

Do not connect the inverter of the portable power station to the AC circuit, otherwise even if the switch of the device is

turned off, the inverter of the device may be damaged.

Please ensure that the power used by the electrical appliance is less than the rated output power of the portable power

station device.

Before the load is connected to the portable power station device, be sure to turn off the load switch before connecting it,

and then turn on the load switch for use.

It is recommended to charge the portable power station device for at least 10 hours before use. Insert the AC adapter

charger into the portable power station’s charging port when charging. The portable power station device can also be

used without charging, but the backup time will be less than the standard backup time.

It is prohibited to connect half wave (hair dryer, electric heating wire heater) load, high-power motor, laser printer,

high-power rectifier load. The portable power station will be automatically protected because of the excessive starting

power during operation.

Description of protection functions and application scenarios:

1. Protection functions: over voltage protection, over current protection, over temperature protection, overcharge

protection, short circuit protection, under voltage protection.

2. Application scenarios: home emergency power supply, outdoor camping power supply, night construction power

supply, emergency rescue power supply, etc.

Use load type:

1. AC fans, DC fans, AC LED lights, DC LED lights, digital products, mobile phones, desktop computers, notebook

computers, TVs, vacuum cleaners, etc.

Operation method:

Power On:

1. When there is no charge, press any key on the panel for more than 1 second, release after the LCD lights up, and then

there will be corresponding output.

2. If the solar energy and DC charger are connected, the LCD will automatically light up. At this time, press any key, and

there will be corresponding output.

Power Off:

1. When there is no charge, press and hold any key on the panel for more than 3 seconds, and then release after the LCD

is off to shut down the portable power station.

Charging Port

LED Light

Power/DC

Output Switch

DC12V Output

USB Output

Power/LED

Light Switch

LCD

Power/AC

Output Switch

AC Output Port

External Battery

Negative Pole

External Battery

Positive Pole

External Battery Fuse

20A2. The LCD cannot be turned off when the solar energy and DC charger are connected. Press each key to turn off each

output.

3. When there is no charge and no output is turned on, the portable power station will automatically shut down after 10

seconds.

Note: The machine has DC under voltage and over voltage protection functions. When the battery is under voltage or

over voltage, the portable power station will automatically shut down.