product_image_name-Generic-F3 Flight Controller Acro 6 DOF/Deluxe 10 DOF For RC Multirotor FPV Racing Drone-Acro-1product_image_name-Generic-F3 Flight Controller Acro 6 DOF/Deluxe 10 DOF For RC Multirotor FPV Racing Drone-Acro-2product_image_name-Generic-F3 Flight Controller Acro 6 DOF/Deluxe 10 DOF For RC Multirotor FPV Racing Drone-Acro-3product_image_name-Generic-F3 Flight Controller Acro 6 DOF/Deluxe 10 DOF For RC Multirotor FPV Racing Drone-Acro-4product_image_name-Generic-F3 Flight Controller Acro 6 DOF/Deluxe 10 DOF For RC Multirotor FPV Racing Drone-Acro-5

Share this product

Delivery & Returns

  • Pay online using your Naira bank card, no Dollar card needed
  • Selected items below ₦3000 may be eligible for cheaper delivery option by Nigeria postal services. More info
  • Pay for international delivery online. No additional duties and taxes when your order gets delivered

Delivery Information

Shipped from Abroad and normally delivered between Thursday 10 Sep and Thursday 17 Sep. Please check exact dates in the Checkout page.See more

Return Policy

Free return within 15 days for Jumia Mall items and 7 days for other eligible items.See more

Warranty

n/a

Seller Information

Kiss Me

70%Positive Seller Score

1108 Followers

Follow

Product details

F3 Flight Controller Acro 6 DOF/Deluxe 10 DOF for Multirotor Racing

Specification: Manual
Item Name: F3 Flight Control
Version: Acro 6DOFand Deluxe 10DOF (with MS5611 Barometer and HMC5883 Compass)
*35x35mm board, 30mm mounting holes.
* STM32F3 CPU.
* High-capacity Flash (Acro 6DOF and Deluxe 10DOF)
* MPU6050 Accelerometers and Gyroscopes
* MS5611 Barometer (Deluxe 10DOF)
* HMC5883 Compass (Deluxe 10DOF)
* MicroUSB socket.
* 4 x 4 pin JST-SH Socket (I2C, SWD, 2xuart)
* 2 x 8 pin JST-SH Socket (PPM, PWM, SERIAL RX, GPIO, ADC, 3V, 5V, GND)
* 8 x 3 pin though-holes for pin headers for ESC / Servo connections.
* 2 x 4 pin though-holes for the 2x serial ports .
* 2 x 2 pin though-holes for battery voltage and buzzer.

Features:

Better coding practices and introducing tests, easier to maintain and for future development. (Dominic has software development background)
Many bugs fixed from Baseflight.
Supports more flight controllers, including CC3D, CJMCU and Sparky.
Supports OneShot ESC and more than 8 RC channels.
Additional PID controllers that uses floating point arithmetic operations. (now has 3 built-in PID Controllers)
Many more features such as RGB LED strip support, Autotune, In-flight PID tuning with your radio etc.

Flight Performance
The F3 builds on tried and tested software, processor and sensor technology to make your aircraft fly like its on rails.

No-Compromise I/O
Use all the features all the time; e.g. Connect your OSD + SmartPort + SBus + GPS + LED Strip + Battery Monitoring + Sonar + 8 motors - all at the same time!

Configurable
The F3 runs Cleanflight which can be configured to suit your needs using a cross-platform GUI (Windows/OSX/Linux).

Tiny and lightweight
The F3 has a standard 35x35mm form-factor with 30mm mounting holes and weighs just 6 grams.

Flight Logging
On-board high-capacity black box flight log recorder - optimize your tuning and see the results of your setup without guesswork.

Next-Generation CPU
The F3 has an ARM Cortex-M4 72Mhz CPU with Math co-processor (FPU) for efficient flight calculations that gets more done in less time.
Loop times up to ~2x as fast as previous-generation STM32F1 based boards.

Developer Friendly
Developer friendly debugging port (SWD) and boot mode selection, unbrickable bootloader.

OneShot ESC
Full support for OneShot ESCs for easy PID tuning and a sharper response.

Broad RC receiver Support
Supports SBus, SumH, SumD, Spektrum1024/2048, XBus, PPM, PWM receivers. No external inverters required (built-in).

Programmable LED
Dedicated output for programmable LEDs - great for orientation, racing and night flying.

Battery Monitoring
Battery monitoring ports for voltage and current.

Sonar
Sonar support for precision low-altitude hold.

I2C Port
I2C port always powered, perfect for external sensors or always-on OLED Screen.

Buzzer
Buzzer port for audible warnings and notification

Package Included:
Acro 6DOF Version
1 x F3 Flight Control for Multicopter
2 x 8p Wire Rod
2 x 4p Extension Path
5 x Pins set

Deluxe 10DOF Version
1 x F3 Flight Control for Multicopter with MS5611 Barometer and HMC5883 Compass
2 x 8p Wire Rod
2 x 4p Extension Path
5 x Pins set

Specifications

Key Features

  • Reasonable price
  • Durable and practical
  • Top Sales Item
  • Type:Medium
  • and high quality
  • Durable and easy to use
  • Suitable for picture, photo ,cross stitch frame

Specifications

  • SKU: GE779TB0T70P6NAFAMZ
  • Color: Multicolor
  • Main Material: n/a
  • Size (L x W x H cm): 12x8x5
  • Weight (kg): 0.08

Customer Feedback

See All

Product Ratings (1)

4/5
4 out of 5

1 rating

Product Reviews (0)

This product has no reviews yet.

F3 Flight Controller Acro 6 DOF/Deluxe 10 DOF For RC Multirotor FPV Racing Drone-Acro

F3 Flight Controller Acro 6 DOF/Deluxe 10 DOF For RC Multirotor FPV Racing Drone-Acro

₦ 3,227
₦ 6,45450%

Recently Viewed

See All