Shipped from abroad
Product Images
HomeGarden & OutdoorsGenerators & Portable PowerSolar & Wind PowerSolar PanelsViewStar-AU Series 30A PWM Solar Charge Controller For
Shipped from abroad
EPEVER ViewStar-AU Series 30A PWM Solar Charge Controller For
Select Variation
Promotions
Delivery & Returns
Seller Information
Bett Life
30%Seller Score
275 Followers
Seller Performance
Order Fulfillment Rate: Very Poor
Quality Score: Average
Product details
Description:
The VS-AU controller is a PWM charge controller with built in LCD display that adopts the most advanced digital technique. The multiple load control modes enable it can be widely used on solar home system, traffic signal, solar street light, solar garden lamp, etc.
Features:
UL and VDE certified Terminals Charge controller, Adopt high quality components of ST,IR and Infineon, ensure longer using lifespan, safer and more reliable .
PWM Controller protection built-in against reverse polarity, overcharging, over-discharging, overload, short-circuiting, and reverse current. It protect the battery from being over-charged and over-discharged by the loads.
Includes 3-Stage intelligent PWM : Bulk, Boost/Equalize, Float, temperature compensation increase your battery life and improve your system's performance
Multiple load control modes: manual control, lighting ON/OFF, light On+Timer. Support 3 options: Sealed, Gel, and Flooded.
LCD screen with backlight for dynamically displaying device's operating data and working condition.
Electronic protections:
PV reverse polarity protection
Battery reverse polarity protection
Battery over voltage protection
Battery over discharge protection
Battery overheating protection
Controller overheating protection
Load short circuit protection
Load overload protection
Specifications:
Voltage(Optional):
VS1024AU(Suitable for 12V/24V);
VS2024AU(Suitable for 12V/24V);
VS3024AU(Suitable for 12V/24V);
VS4524AU(Suitable for 12V/24V);
VS6024AU(Suitable for 12V/24V);
VS3048AU(Suitable for 12V/24V/36V/48V);
VS4548AU(Suitable for 12V/24V/36V/48V) ;
VS6048AU(Suitable for 12V/24V/36V/48V)
Current: 10A(only for 12V/24V);20A(only for 12V/24V);30A;45A;60A (Optional)
Battery type: Sealed(Default) / Gel / Flooded
Equalize Voltage: Sealed:14.6V/ Gel: No/ Flooded:14.8V
Boost Voltage: Sealed:14.4V/ Gel:14.2V/ Flooded:14.6V
Float Voltage: Sealed/Gel/Flooded:13.8V
Low Voltage Reconnect Voltage: Sealed/Gel/Flooded:12.6V
Low Voltage Disconnect Voltage: Sealed/Gel/Flooded:11.1V
Self-consumption ≤9.2mA/12V;≤11.7mA/24V; ≤14.5mA/36V;≤17mA/48V
Temperature compensation coefficient: -3mV/℃/2V(25℃)
Charge circuit voltage drop ≤0.29V
Discharge circuit voltage drop ≤0.16V
LCD temperature range -20℃~+70℃
Working environment temperature: -25℃~+55℃ (Product can work continuously at full load)
Relative humidity: ≤95%, N.C.
Enclosure: IP30
Grounding: Common Positive
USB output: 5VDC/2.4A(Total)
Product: 214x128.7x72.2mm / 8.4 * 5.1 * 2.8inch
Package Size: 220x135x75mm
Package Weight: 1kg
Package List:
1 * PWM Charge Controller
The VS-AU controller is a PWM charge controller with built in LCD display that adopts the most advanced digital technique. The multiple load control modes enable it can be widely used on solar home system, traffic signal, solar street light, solar garden lamp, etc.
Features:
UL and VDE certified Terminals Charge controller, Adopt high quality components of ST,IR and Infineon, ensure longer using lifespan, safer and more reliable .
PWM Controller protection built-in against reverse polarity, overcharging, over-discharging, overload, short-circuiting, and reverse current. It protect the battery from being over-charged and over-discharged by the loads.
Includes 3-Stage intelligent PWM : Bulk, Boost/Equalize, Float, temperature compensation increase your battery life and improve your system's performance
Multiple load control modes: manual control, lighting ON/OFF, light On+Timer. Support 3 options: Sealed, Gel, and Flooded.
LCD screen with backlight for dynamically displaying device's operating data and working condition.
Electronic protections:
PV reverse polarity protection
Battery reverse polarity protection
Battery over voltage protection
Battery over discharge protection
Battery overheating protection
Controller overheating protection
Load short circuit protection
Load overload protection
Specifications:
Voltage(Optional):
VS1024AU(Suitable for 12V/24V);
VS2024AU(Suitable for 12V/24V);
VS3024AU(Suitable for 12V/24V);
VS4524AU(Suitable for 12V/24V);
VS6024AU(Suitable for 12V/24V);
VS3048AU(Suitable for 12V/24V/36V/48V);
VS4548AU(Suitable for 12V/24V/36V/48V) ;
VS6048AU(Suitable for 12V/24V/36V/48V)
Current: 10A(only for 12V/24V);20A(only for 12V/24V);30A;45A;60A (Optional)
Battery type: Sealed(Default) / Gel / Flooded
Equalize Voltage: Sealed:14.6V/ Gel: No/ Flooded:14.8V
Boost Voltage: Sealed:14.4V/ Gel:14.2V/ Flooded:14.6V
Float Voltage: Sealed/Gel/Flooded:13.8V
Low Voltage Reconnect Voltage: Sealed/Gel/Flooded:12.6V
Low Voltage Disconnect Voltage: Sealed/Gel/Flooded:11.1V
Self-consumption ≤9.2mA/12V;≤11.7mA/24V; ≤14.5mA/36V;≤17mA/48V
Temperature compensation coefficient: -3mV/℃/2V(25℃)
Charge circuit voltage drop ≤0.29V
Discharge circuit voltage drop ≤0.16V
LCD temperature range -20℃~+70℃
Working environment temperature: -25℃~+55℃ (Product can work continuously at full load)
Relative humidity: ≤95%, N.C.
Enclosure: IP30
Grounding: Common Positive
USB output: 5VDC/2.4A(Total)
Product: 214x128.7x72.2mm / 8.4 * 5.1 * 2.8inch
Package Size: 220x135x75mm
Package Weight: 1kg
Package List:
1 * PWM Charge Controller
Specifications
Key Features
- UL and VDE certified Terminals Charge controller, Adopt high quality components of ST,IR and Infineon, ensure longer using lifespan, safer and more reliable .
- PWM Controller protection built-in against reverse polarity, overcharging, over-discharging, overload, short-circuiting, and reverse current. It protect the battery from being over-charged and over-discharged by the loads.
- Includes 3-Stage intelligent PWM : Bulk, Boost/Equalize, Float, temperature compensation increase your battery life and improve your system's performance
- Multiple load control modes: manual control, lighting ON/OFF, light On+Timer. Support 3 options: Sealed, Gel, and Flooded.
- LCD screen with backlight for dynamically displaying device's operating data and working condition.
- UL and VDE certified Terminals Charge controller, Adopt high quality components of ST,IR and Infineon, ensure longer using lifespan, safer and more reliable .
What’s in the box
1 x PWM Charge Controller
Specifications
- SKU: EP403GP00FITYNAFAMZ
- Color: naturla
- Size (L x W x H cm): 1.00×1.00×1.00
- Weight (kg): 0.76
Customer Feedback
This product has no ratings yet.
/product/00/724246/1.jpg?5469)
EPEVER ViewStar-AU Series 30A PWM Solar Charge Controller For
₦ 27,843
₦ 55,68650%