Share this product

30A 12V/24V PWM Dual USB Battery Solar Panel Controller Charge Regulator

₦ 19,000

In stock

+ shipping from ₦ 1,700 to LEKKI-AJAH (SANGOTEDO)

0 out of 5

(No ratings available)

Variation available

001

2offers starting from₦ 19,000

Delivery Fees ₦ 1,700

Ready for pickup between 12 October and 13 October if you place your order within the next 15hrs 50mins

Delivery Fees ₦ 2,750

Ready for delivery between 12 October and 13 October if you place your order within the next 15hrs 50mins

Free return within 7 days for ALL eligible itemsDetails

Grandma business

74%Seller Score

6 Followers

Shipping speed: Good

Quality Score: Excellent

Customer Rating: Excellent

Cancellation Rate: Very Poor

₦ 20,000

Sold by: Grandma business | Seller Score: 74%

Watch Video on how to use: https://www.youtube.com/watch?v=S9-xOMrHTGg
1. Connect the positive and negative electrodes of the livestock battery into the controller according to the diagram, and the controller will automatically detect the voltage of the livestock battery.
2. Connect the positive and negative poles of the load into the controller according to the diagram, and be careful not to connect them in reverse
3. Connect the solar panel to the controller as shown in the figure.
Note: please connect in strict accordance with the above order, otherwise the controller may be damaged,
The disassembly sequence is opposite to the wiring sequence.
Setting parameters
In the interface 2-5, long press the up key for 5 seconds to restore the default value.
Press and hold the menu key for 5 seconds to enter the manual setting. At this time, the number will flash,
Press the up and down keys to adjust the parameter value, and then press the menu key for 5 seconds to exit the setting

Note: 1. Main interface 1. Press the flip key alone to turn on / off the load.
2. Interface 5 load working mode: [24h] load normally open m

Watch Video on how to use: https://www.youtube.com/watch?v=S9-xOMrHTGg
1. Connect the positive and negative electrodes of the livestock battery into the controller according to the diagram, and the controller will automatically detect the voltage of the livestock battery.
2. Connect the positive and negative poles of the load into the controller according to the diagram, and be careful not to connect them in reverse
3. Connect the solar panel to the controller as shown in the figure.
Note: please connect in strict accordance with the above order, otherwise the controller may be damaged,
The disassembly sequence is opposite to the wiring sequence.
Setting parameters
In the interface 2-5, long press the up key for 5 seconds to restore the default value.
Press and hold the menu key for 5 seconds to enter the manual setting. At this time, the number will flash,
Press the up and down keys to adjust the parameter value, and then press the menu key for 5 seconds to exit the setting

Note: 1. Main interface 1. Press the flip key alone to turn on / off the load.
2. Interface 5 load working mode: [24h] load normally open m