ZW 3hp Concrete Vibrator Motor - Single Phase - 100% Copper Coil

1. New small electric concrete vibrator motor concrete table vibrator is a type of vibration motor, the eccentric block and a motor power fit each single or three-phase asynchronous motor rotor shaft which are arranged on both ends, the centrifugal force generated by the rotation of the eccentric block vibration force, drive the whole body vibration.
2. Concrete plate vibrator attached on the surface of concrete compaction, leveling instrument, operation at the bottom of the ZW plate vibrator installation of a plate, attached to the surface of plate and concrete, the excitation force is transmitted to the concrete mixture.
3. Electric Vibrator Drive Mode and New Condition external concrete vibrator is mainly used in construction, building the plane vibration, dam,bridge, prefabricated concrete tamping.
Main Features1. This series of concrete vibrator is safe, reliable, stable performance, simple structure, easy maintenance.2. Concrete vibrator adopts special-designed vibration motor.3. Concrete vibrator adopts full-enclosed structure, anti-dust anti-moisture.4. Unique eccentric structure, symmetrically distribute at outer shaft. Such as ZW10, ZF150, ZF220, ZW20 model, the vibrating force can be adjusted according to construction situation.
5. The machine is completely closed and high strength, convenient assembled and repair. Power heart with four core rubber cable.ZW External Electric Motovibrators consist of an electric motor housed in a sturdy FMEA-designed cast casing, with eccentric weights fitted on both shaft ends.FunctionZW External Electric Motovibrators can be used as flow aids, on hoppers or silos to improve material discharge, or as drives on vibrating machines for several purposes such as conveying, screening, sizing, or compacting in a variety of industries.When the ZW is switched on a sinusoidal centrifugal force is provided by rotation of the eccentric weights. With only one ZW fitted on a vibrating machine a rotating force is provided resulting in a circular movement of the machine. Two counter-rotating ZW fitted in parallel on the same machine provide a linear force resulting in a linear movement of the machine. The requirement of circular or linear movement depends on the application