Zealot S95 120W Wireless High Bass Bluetooth Speaker

Designed for heavy-duty audio output and outdoor versatility, this portable sound system utilizes a four-driver acoustic architecture delivering 120W of total system power. It combines two 120mm 50W main subwoofers with two 42mm 10W high-frequency tweeters, providing a dynamic frequency response range of 20Hz to 20kHz with minimal harmonic distortion. Built with a high-capacity internal 24,000mAh lithium-ion battery array, the device provides extended standalone music playback while serving as a secondary power bank via USB-A output (5V/2A) to charge external devices such as mobile phones or tablets during field use. The unit incorporates Bluetooth 5.3 technology, maintaining a stable wireless link up to 10 meters, and supports True Wireless Stereo (TWS) setup for pairing two compatible units into a multi-channel configuration. Audio playback options include physical inputs for micro SD/TF memory cards, USB flash drives, and an analog 3.5mm AUX jack. The structural chassis features dynamic RGB lighting strips along the front face with customizable illumination modes, an integrated carry handle, protective end bumpers, and an IPX6 water-resistant rating against high-pressure water streams and outdoor rain.

GUIDE TO PROPER USAGE

1. Charge the internal battery fully using a compatible Type-C cable connected to a 5V/2A or supported PD fast-charging adapter before first operation.
2. Press and hold the power button located on the top panel for 3 seconds to power on the system.
3. Turn on Bluetooth on your source device, locate "ZEALOT S95" in the available devices list, and connect.
4. Short press the Mode ("M") button to cycle sequentially through Bluetooth, TF Card, USB drive, and AUX input modes.
5. Press the Light control button to switch between dynamic RGB lighting modes or disable illumination.
6. Short press the EQ button to switch between builtin equalizer sound profiles (Standard, Bass Boost, Outdoor).

SAFETY NOTE

1. Do not submerge the speaker directly underwater; the IPX6 rating protects against water splashes and rain, not submersion.
2. Ensure the rear rubber port cover is fully pressed and sealed flat against the chassis before exposing the device to moisture or outdoor environments.
3. Do not open, puncture, or expose the internal 24,000mAh lithium battery to extreme heat, open flames, or direct sunlight.
4. Use standard 5V/2A or certified PD fast chargers; avoid using uncertified high-voltage power adapters to prevent thermal buildup and circuit damage.
5. Store the speaker in a cool, dry area away from direct moisture when not in use for extended periods.