Xtool IP508 OBD2 Ii Car Scanner ABS SRS Transmission Engine Wit 6 Reset Services

XTOOL InPlus IP508 It supports ECU information, read & clear DTC, live data, and freezes frame for 5 major systems, including the engine, transmission, EPB, ABS, and SRS. Some common special 
functions, such as Throttle matching, ABS Bleeding, Maintenance light Reset, EPB Reset, SAS Matching, and BMS Reset are supported. It covers 98% of vehicles on market, works on more than 85 brands, and 10000 cars.
1. Reading Codes: Show the detailed description of the Diagnostic Trouble Code (DTCs)
2. Erasing Codes & Reset: Turns off Check Engine Light (MIL), clears codes and resets monitors.
3. Data Stream: Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.
4. I/M Readiness Status: Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.
5. Read Live Data Stream: Show the information of continuous data stream from a vehicle in live graphic (waveform) display.
6. View Freeze Frame Data: Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.
7. O2 Sensor Test: Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer.
8. On-Board Monitor Test: Retrieves and displays test results for emission-related power train components and systems.
9. Read Vehicle Information:Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.
10. Component Test: Certain vehicle components can be actuated by commands sent from the scanner to test their operability.
1. Free Update Lifetime for All Functions
Permanent update service for life, no worries about other uncertain cost.
2. 15 Language Supports
English, French, Spanish, Russian, Japanese, German, Italian, Portuguese, Polish, Swedish, Arabic,Thai, Korean. Please offer your tool S/N if you need to change the menu language.

3. 6 Maintenance Services
Oil Reset, EPB Reset, ABS Bleeding, Throttle Relearn, BMS Reset, SAS Reset
4. 4 Major System Diagnostics
5. 8-IN-1 Live Data Graphing & Date Record & Playback
View Various Sensors’ PIDs, like O2 sensor data, Misfire Data, Long/Short Term Fuiiiiel Trim, Mass Air Flow, Intake Air Temp, Fuiiiiel Rail Pressure, Engine RPM, Idle Speed, Coolant Temp, Transmission Oil 
Temperature, ABS Wheel Speed, and etc.
7. Full OBD2 Engine Diagnostic
ABS Bleeding: Cycle the ABS pump to bleed the air out of the ABS to restore the braking sensitivity.
Oil Reset: Reset the service and zero oil light once changed the oil.
Throttle Relearn: After clearing or repairing the electronic throttle, re-learning and adapt throttle sensor position.
EPB Reset: Reset the calipers, brake discs or pads after the electronic parking brake system is repaired or replaced.
BMS Reset: Reset the monitoring unit of the car battery after replacement.
SAS Calibration: Erase the fault steering angle sensor memories and make calibration for the Steering Angle Sensor.