This website uses cookies
This website uses cookies. For further information on how we use cookies you can read our Privacy and Cookie notice
HomeAutomobileCar Electronics & AccessoriesCar Electronics AccessoriesAudio & Video AccessoriesPortable Device Car MountsWireless Remote Control Switch With Receiver Module RF 433 MHZ LED Remote
/product/42/2383773/1.jpg?0038)
Share this product
₦ 61,560
₦ 95,90436%
In stock
+ shipping from ₦ 11,723 to LEKKI-AJAH (SANGOTEDO)
0 out of 5
(No ratings available)Variation available
2offers starting from₦ 61,560
See More OffersPromotions
Delivery & Returns
Shipped from abroad
Choose your location
Pickup Station
Delivery Fees ₦ 11,723
Ready for pickup between 27 May and 29 May if you place your order within the next 20hrs 48mins
Door Delivery
Delivery Fees ₦ 12,483
Ready for delivery between 27 May and 29 May if you place your order within the next 20hrs 48mins
Return Policy
Free return within 7 days for ALL eligible itemsDetails
Seller Information
Technetium Rafter
New Seller
Be the first to follow
Seller Performance
This seller does not have enough history for us to evaluate his performance yet
Compare Offers
₦ 71,280
Sold by: Cui Ruo213 | New Seller
Product details
Feature:
Input voltage: 12 V, RF operating mode: superheterodyne
• Receiver sensitivity:> 97dbm
• Transmission distance:> 100 m (open space)
• Decoding mode: MCU software decoding
• Remote storage: 20
• Remote type support: EV1527 learning code
• Operating mode: momentary, toggle, locking delay (5 s, 10 s, 15 s)
• Exit terminal: no, NC, COM
• Dimension of the printed circuit: 35x30x18mm (L, W, H)
• Remote control battery: 2 button batteries 3 V CR2016
Remote programming
-Clear code:
Press the learning button on the receiver 8 times, the codes will be reset.
After erasing the code, the remote controls must be recalibrated.
-Learning code: (toggle-press the remote button to turn on, press again to turn off.)
Press the learning button on the receiver 2 times, wait a moment, the LED will be off, it will enter the learning state.
-Press the teach button on the receiver 3 times, the LED (on the receiver) will flash 3 times.
When the LED is on, press the button on the remote control (you want to let it learn), press the A button on the remote control, LED the flash 3 times.
Press button B on the remote control, the LED flashes 3 times.
After 3 seconds, the LED indicator will be off, learning to succeed.
Package including
1 * receiver module
1 * remote control (with battery)
Input voltage: 12 V, RF operating mode: superheterodyne
• Receiver sensitivity:> 97dbm
• Transmission distance:> 100 m (open space)
• Decoding mode: MCU software decoding
• Remote storage: 20
• Remote type support: EV1527 learning code
• Operating mode: momentary, toggle, locking delay (5 s, 10 s, 15 s)
• Exit terminal: no, NC, COM
• Dimension of the printed circuit: 35x30x18mm (L, W, H)
• Remote control battery: 2 button batteries 3 V CR2016
Remote programming
-Clear code:
Press the learning button on the receiver 8 times, the codes will be reset.
After erasing the code, the remote controls must be recalibrated.
-Learning code: (toggle-press the remote button to turn on, press again to turn off.)
Press the learning button on the receiver 2 times, wait a moment, the LED will be off, it will enter the learning state.
-Press the teach button on the receiver 3 times, the LED (on the receiver) will flash 3 times.
When the LED is on, press the button on the remote control (you want to let it learn), press the A button on the remote control, LED the flash 3 times.
Press button B on the remote control, the LED flashes 3 times.
After 3 seconds, the LED indicator will be off, learning to succeed.
Package including
1 * receiver module
1 * remote control (with battery)
Specifications
Key Features
Feature:
Input voltage: 12 V, RF operating mode: superheterodyne
• Receiver sensitivity:> 97dbm
• Transmission distance:> 100 m (open space)
• Decoding mode: MCU software decoding
• Remote storage: 20
• Remote type support: EV1527 learning code
• Operating mode: momentary, toggle, locking delay (5 s, 10 s, 15 s)
• Exit terminal: no, NC, COM
• Dimension of the printed circuit: 35x30x18mm (L, W, H)
• Remote control battery: 2 button batteries 3 V CR2016
Remote programming
-Clear code:
Press the learning button on the receiver 8 times, the codes will be reset.
After erasing the code, the remote controls must be recalibrated.
-Learning code: (toggle-press the remote button to turn on, press again to turn off.)
Press the learning button on the receiver 2 times, wait a moment, the LED will be off, it will enter the learning state.
-Press the teach button on the receiver 3 times, the LED (on the receiver) will flash 3 times.
When the LED is on, press the button on the remote control (you want to let it learn), press the A button on the remote control, LED the flash 3 times.
Press button B on the remote control, the LED flashes 3 times.
After 3 seconds, the LED indicator will be off, learning to succeed.
Package including
1 * receiver module
1 * remote control (with battery)
Input voltage: 12 V, RF operating mode: superheterodyne
• Receiver sensitivity:> 97dbm
• Transmission distance:> 100 m (open space)
• Decoding mode: MCU software decoding
• Remote storage: 20
• Remote type support: EV1527 learning code
• Operating mode: momentary, toggle, locking delay (5 s, 10 s, 15 s)
• Exit terminal: no, NC, COM
• Dimension of the printed circuit: 35x30x18mm (L, W, H)
• Remote control battery: 2 button batteries 3 V CR2016
Remote programming
-Clear code:
Press the learning button on the receiver 8 times, the codes will be reset.
After erasing the code, the remote controls must be recalibrated.
-Learning code: (toggle-press the remote button to turn on, press again to turn off.)
Press the learning button on the receiver 2 times, wait a moment, the LED will be off, it will enter the learning state.
-Press the teach button on the receiver 3 times, the LED (on the receiver) will flash 3 times.
When the LED is on, press the button on the remote control (you want to let it learn), press the A button on the remote control, LED the flash 3 times.
Press button B on the remote control, the LED flashes 3 times.
After 3 seconds, the LED indicator will be off, learning to succeed.
Package including
1 * receiver module
1 * remote control (with battery)
What’s in the box
1*package
Specifications
- SKU: GE779CA5NRCTLNAFAMZ
- Model: avoid chenicals
- Production Country: China
- Size (L x W x H cm): 12 x 13 x 14 cm
- Weight (kg): 1
- Color: Matches the image
Verified Customer Feedback
Customers who have bought this product have not yet posted comments
/product/42/2383773/1.jpg?0038)
Wireless Remote Control Switch With Receiver Module RF 433 MHZ LED Remote
₦ 61,560
₦ 95,90436%
Questions about this product?