Winner Transfer Inkjet Light Heat Transfer Paper Only For Professional Heat Press Machine 100pcs

Search TransOurDream Discover More Transfer Papers

HEAT PRESS：

MIRROR Printing ,Set Temperature to 190℃ (374°F). Set Time to 10 seconds, Apply HEAVY pressure,Hot peel. Note: This inkjet light transfer paper 5.0 is only suitable for heat press machine, please do not transfer with iron.

Step 1: PRINT

Print your design on the BLANK Side of transfer paper.

Before Printing: Select MIRROR Printing. Set Paper Type to Plain Paper or Photo Paper.

Set Printing Quality to Photo or High Quality Photo.

Step 2: CUT

Cut out your design with scissors.

NOTES:Trim close to the printed parts but leave a bit of a margin - 2mm.Don't cut so close that your design falls apart or warps while you are ironing.

Step 3: PLACE

Place T-shirt on a solid and heat resistant surface. Iron the T-shirt to remove creases. Place your design facing DOWNWARDS onto appropriate position of T-shirt.

Step 4: TRANSFER

Set Temperature to 190℃ (374°F).Set Time to 10 seconds. Apply HEAVY pressure.

Step 5: Hot PEEL peel away the backing paper.

Step 6: DONE Congratulations! Your DIY image transfer has been done. Enjoy!

WASHING  INSTRUTIONS :

1.Don’t wash within 48 hours after transfer.2.Wash the garment before wearing.3.Don’t use bleach or alkaline detergent.4.Turn the garment inside out when washing.5.Don’t soak to wash.6.Full spin cycle, cold water washing.7.No delicate washing.8.No tumble dry.9.Remove garment promptly after washing, colors may bleed if left wet too long.10.Unfold the transferred image, hang to dry naturally.

STORAGE INSTRUCTIONS:

1.Keep the image facing outside when fold the garment. 2.Store the garment in a dry and cool place.3.Keep the unused transfer paper sealed and presser