Weifeng Multi-Angle Adjustable Photography Tripod Stand For Cameras & Smartphones

Capturing stable photographs, smooth video pans, and clear vertical live streams is straightforward with this lightweight aluminum camera and smartphone tripod stand. Built from strong aluminum alloy tubing, the frame provides reliable structural support while keeping total weight minimal for effortless field transport. The 3-stage telescoping legs feature quick-release flip locks that allow rapid height setup on studio floors or outdoor terrain. A hand-cranked center column extension mechanism allows smooth vertical elevation adjustments to set your exact lens position. Equipped with a 3-way fluid-effect pan head, the tripod supports 360-degree horizontal rotation and smooth vertical tilting for dynamic camera tracking. The integrated quick-release mounting plate enables swift camera attachment and detachment, while the included spring-loaded mobile phone holder converts the stand for smartphone vlogging, video conferencing, and live content creation. Self-adjusting anti-slip rubber feet maintain stability across uneven ground, and a built-in center hook allows hanging counterweights to stabilize the frame during windy outdoor shoots.

SAFETY NOTES

1. Do not exceed the maximum load weight capacity of 3.0 kg to prevent leg joint slippage or tip-over damage.
2. Ensure all leg flip locks and top platform tilt knobs are securely tightened before mounting valuable cameras or phones.
3. Check that the removable quick-release plate is locked firmly into the pan head housing before letting go of your camera device.
4. Always collapse tripod legs and store the unit in its zipped carrying bag when transporting through crowded areas.
5. Avoid setting up the tripod on steep or slippery inclines without hanging a stabilizing weight from the center column hook.

GUIDE TO PROPER USAGE

1. Unzip the nylon carrying bag, withdraw the tripod, and release the leg flip locks to extend each 3-section leg to desired height.
2. Secure the flip locks, place the tripod on a flat surface, and adjust the rubber feet to ensure the base is balanced.
3. Turn the center column hand crank to raise or lower the central extension rod to your preferred eye level.
4. Attach your camera via the standard 1/4-inch screw on the quick-release plate, or screw on the smartphone adapter clamp for mobile recording.
5. Loosen the pan and tilt locking handles to maneuver your camera smoothly, then tighten the knobs to lock in fixed angles.