Variable Frequency Drive 2.2KW VFD 1PH AC 220V Input 3PH AC

Description:
1. Varied Frequency Driver: Supports 1PH AC 220V input and 3PH AC 0-220V output, the 2.2KW variable frequency drive adopts IGBT module for good bearing capacity and more stability.
2. Over Voltage Protection: When the bus voltage gets up to or exceeds the bus overvoltage suppression point during the operation, the frequency converter will automatically adjust the operating frequency to suppress the bus voltage rise, thereby ensuring that the frequency converter does not activate overvoltage protection due to excessive bus voltage.
3. Over Current Protection: During operation, through real time monitoring of the load current, the VFD automatically limits it to not exceed the set overcurrent suppression point to prevent fault tripping caused by excessive current. This function is particularly suitable for loads with large inertia or severe changes.
4. Broad Range Application: Widely used in the speed regulation of various three phase asynchronous motors, achieving functions such as motor speed regulation, energy conservation and environmental protection, improving production processes, and improving production efficiency.
5. Comes with Great Design: Independent air duct design along with industrial flame retardant ABS material enables high impact resistance, high heat resistance, high safety and reliability.


Specifications:
Item Type: Variable Frequency Drive
Material: Flame retardant ABS.
Model: SKI90-2D2G-1
Input: 1PH AC220V ± 15% 23.0A 50-60Hz
Output: 3PH AC0-220V 9.6A 0-400Hz
Power Capacity: 4.0KVA
Suitable Motor: 2.2KW 3HP
Power Supply:
Terminal Symbol: 10V-GND
Terminal Name: Connect to +10V power supply.
Function Description: Output +10V power supply with 150mA maximum output current, has short circuit protection. Generally used as an external potentiometer working power supply, and the resistance range of the potentiometer is 1kΩ~5kΩ.
Terminal Symbol: 24V-COM
Terminal Name: Connect to +24V power supply.
Function Description: Output +24V power supply outwards. Generally used as a working power supply for digital input and output terminals and the power supply of external sensor, with a maximum output of 200mA
Analog Terminal:
Terminal Symbol: Al1-GND
Terminal Name: Analog input terminal 1.
Function Description: The input range is DC 0V~10V, 0mA~20mA, determined by parameter P437. The impedance at voltage input is 22k Ω, and the impedance at current input is 500 Ω
Terminal Symbol: AI2-GND
Terminal Name: Analog input terminal 2.
Function Description: The input range is DC0V~10V 0mA~20mA, determined by parameters P4-37. The impedance at voltage input is 22 kQ, and the impedance at current input is 500 Ω.
Terminal Symbol: AO1-GND
Terminal Name: Analog output terminal 1.
Function Description: The output voltage range is 0V~10V. The output current range is 0mA - 20mA, 4-20mA, and P5-23 can be selected.
Terminal Symbol: AO2-GND
Terminal Name: Analog output terminal 2.
Function Description: The output voltage range is 0V-10V. No current output function. The J1 jumper cap on the isolated main control board at the AO2 position, but the non isolated main control board does not have this function.
Digital Input:
Terminal Symbol: X1-COM
Terminal Name: Digital Input 1
Terminal Symbol: X2-COM
Terminal Name: Digital Input 2
Terminal Symbol: X3-COM
Terminal Name: Digital Input 3
Terminal Symbol: X4-COM
Terminal Name: Digital Input 4
Function Description: HD1 X5 can be used as a high speed pulse input channel in addition to the characteristics of X1 to X4. Maximum input frequency of 50 kHz. 1 k Ω input impedance. Voltage range at level input is 5V~30V.
Terminal Symbol: HDI-COM (X5 terminal)
Terminal Name: Digital input 5, high speed pulse input terminal.
Terminal Symbol: A+B-
Terminal Name: RS485 communication.
Function Description: A+ is the positive input of 485 communication differential signal, and B - is the negative input of differential signal.
Digital Output:
Terminal Symbol: Y1-COM
Terminal Name: Open Collector Output
Function Description: As an open collector output terminal, the J1 jumper cap on the 90 isolation type main control board is connected to the AO2 position.
Terminal Symbol: HDO-COM
Terminal Name: High Speed Pulse Output
Function Description: Restricted by the selection of HDO terminal output mode of function coding P5-00, it can be output as a high speed pulse with a maximum frequency of 50 kHz. When output as a collector open circuit, the

Specifications is the same as Y1.
Terminal Symbol: K1A-K1B-K1C
Terminal Name: Relay 1 Terminal
Terminal Symbol: K2A-K2B-K2C
Terminal Name: Relay 2 Terminal
Contact Description:
A: Common Point
B: Normally Closed Point
C: Normally Open Point
Contact Driving Capacity:
AC250V, 3A, C0S φ= 0.4. DC 30V, 1A. .


Package list::
1 x
Variable Frequency Drive1 x User Manual
Note:
Pay attention to electricity safety.