UNIWA Solar Motion Sensor Light Outdoor with Remote Control, Split Solar Panel Waterproof LED Wall Security Light for Garden, Garage, Compound & Balcony

1. Split Solar Panel for Flexible Installation

The separate solar panel and LED light design allows the panel to be positioned in a sunny location while the lamp is installed exactly where lighting is needed. The included 3M cable provides more flexibility for walls, balconies, garages and covered areas.

2. PIR Motion Sensor & Automatic Night Operation

Built-in motion and light sensors allow the lamp to respond automatically after dark. The PIR sensor detects movement from approximately 3–5 metres, making it suitable for entrances, gates, pathways, garages and other outdoor areas.

3. Remote Control with Multiple Lighting Modes

Use the included remote control to conveniently select different lighting modes. Choose continuous night lighting, motion-triggered bright light with dim standby, or motion-triggered bright light with automatic off depending on your lighting needs.

4. Outdoor Weather-Resistant Wall Light

Designed for everyday outdoor use, the durable housing helps protect the lamp from rain, dust and changing weather conditions. Suitable for compounds, balconies, gardens, patios, garages, gates and outdoor walls.

5. Solar Powered & Easy to Install

Charges from sunlight during the daytime and provides lighting at night without requiring connection to household electricity. Adjustable mounting brackets allow you to position both the lamp and solar panel for better lighting and solar exposure.

【Easy Installation】

Step 1 – Install the Mounting Bases
Choose suitable positions for the solar panel and LED lamp. Fix the mounting bases securely to the wall using the supplied screws and wall plugs.

Step 2 – Attach the LED Light
Slide or insert the LED lamp into its mounting base and make sure it is securely fixed.

Step 3 – Adjust the Light Angle
Tilt the lamp to direct the light towards the entrance, pathway, garage, balcony or other area you want to illuminate.

Step 4 – Install the Solar Panel
Mount the solar panel in a location that receives sufficient sunlight during the daytime.

Step 5 – Adjust the Solar Panel Angle
Angle the panel towards the sunlight to improve daily charging efficiency.

Step 6 – Connect the Cable
Connect the solar panel cable to the LED lamp and make sure the connection is secure.

Step 7 – Switch On & Select a Mode
Press the lamp's control button or use the included remote control to select the preferred lighting mode.

Step 8 – Allow the Solar Panel to Charge
For initial use, place the solar panel under good sunlight before using the lamp at night.
Activate the Light: If installing during the day, connect the data cable and press the switch. The light will flash once, indicating it is turned on and charging. At night, the light will turn on automatically.

【Warm Tip】
The battery may have low power after long-distance transportation. Please charge the solar panel under direct sunlight before first use to ensure normal lighting performance.