915 Generation Tsl2584Tsv Digital Ambient Light Sensor Module Tsl2584 Light Intensity Light Sensor

The TSL2584TSV is a very-high sensitivity light-to-digital converter that transforms light intensity into a digital signal output capable of direct I²C interface.
The device combines one broadband photodiode (visible plus infrared), one infrared-responding photodiode, and a phoic infrared-blocking filter on a single CMOS integrated circuit.
Two integrating ADCs convert the photodiode currents into a digital output that represents the irradiance measured on each channel.
This digital output can be input to a microprocessor where illuminance (ambient light level) in lux is derived using an empirical formula to approximate the human eye response.
The TSL2584TSV supports a traditional level style interrupt that remains asserted until the firmware clears it.

Key Benefits & Features: The benefits and features of TSL2584TSV, Light-to-Digital
Approximates Human Eye Response
Dual Diode with Phoic Filter
Flexible Operation
Programmable Analog Gain and Integration Time
Suited for Operation Behind Dark Glass
1000000: 1 Dynamic Range
Low Operating Overhead
Programmable Upper and Lower Thresholds
Programmable Persistence Filter
Low Power
3.0 μA Sleep State
Industry Standard Two-Wire Interface
I2C Fast Mode Compatible Interface
Data Rates up to 400 kbit/s
Input Voltage Levels Compatible with1.8−V Bus
The TSL2584TSV applications include:
Display Backlight Control
Keyboard Illumination Control
Printer Paper Detection
Medical Diagnostics
Color: As Shown
Material: PCB

Package Contents:
1 x module
1 x needle arrangement

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.