TP-Link OC300 Omada Hardware Controller, 2 Gigabit Port + 1 USB 3.0 Port

the OC300 Omada Hardware Controller from TP-Link, which integrates into your network through its two Gigabit Ethernet ports. Ideal for use in hospitality, education, retail, and office environments, the OC300 allows you to manage up to 500 Omada devices, covering 15,000 clients across multiple sites from almost anywhere, at any time, using the Omada App. Or, you can use the cloud portal to configure, monitor, and maintain your network with remote firmware updates and automated scheduled tasks. With its plug-and-play design, the OC300 is built to integrate quickly into your network and includes a rackmount kit. The convenient USB 3.1 Gen 1 Type-A port allows you to automatically back up your configuration to a flash drive for added peace of mind.

TP-Link OC300 Specs
Interface    
2 x RJ45 Gigabit Ethernet Port
1 x USB 3.1 Gen 1 Type-A Port
Computer
Processor    
1.2 GHz A72 Quad-Core
Flash Memory    
8 GB eMMC
RAM    
2 GB DDR4
Network
System Management    
Max Sites: 100
Max Accounts: 1000
Max Cloud Accounts: 500
Max Vouchers: 50,000
Max WLAN Groups: 500
Max SSIDs: 16 per Site
Max ACL: Router: 64; Switch: 32; EAP: 16
Max Free Authentication: 32 per Site
Max Pre-Authentication Access: 32 per Site
Max Authentication Free Policy: 96 per Site
Max Reboot Schedule: 8 per Site
Max PoE Schedule: 8 per Site
Max MAC Filter Groups: 8 per Site
Max MAC Addresses: 500 per Group (4000 per Controller)
Max VPN: 64 per Site
Max Static Routing: 64 per Site
Max Policy Routing: 64 per Site
Environmental & Power
Operating Temperature    
32 to 122°F / 0 to 50°C
Storage Temperature    
-40 to 158°F / -40 to 70°C
Operating Humidity    
10 to 90%
Storage Humidity    
5 to 90%
AC Power    
100 to 240 VAC @ 50/60 Hz, 0.6 A
Power Consumption    
9 W (Typical)
14.8 W (Max)
General
Material of Construction    
Metal
Dimensions    
11.6 x 7.1 x 1.7" / 294 x 180 x 44 mm