Home Phones & Tablets Mobile Phone Accessories Battery Chargers Solar ChargersDC Fuse and Holder 1100v

product_image_name-Tomzn-DC Fuse and Holder 1100v-1

product_image_name-Tomzn-DC Fuse and Holder 1100v-2

product_image_name-Tomzn-DC Fuse and Holder 1100v-3

product_image_name-Tomzn-DC Fuse and Holder 1100v-4

Share this product

Tomzn DC Fuse and Holder 1100v

Name: DC Fuse and Holder 1100v
Brand: Tomzn
Price: 19650.00 NGN
Availability: InStock

Brand: Tomzn | Similar products from Tomzn

₦ 19,650

₦ 30,50036%

Few units left

+ shipping from ₦ 750 to LEKKI-AJAH (SANGOTEDO)

0 out of 5

(No ratings available)

Variation available

fuse2pole

Promotions

Call 07006000000 To Place Your Order Enjoy cheaper shipping fees when you select a PickUp Station at checkout.

Report incorrect product information

Delivery & Returns

Choose your location

Pickup Station

Delivery Fees ₦ 750

Ready for pickup between 01 January and 02 January if you place your order within the next 19hrs 54mins

Door Delivery

Delivery Fees ₦ 1,710

Ready for delivery between 01 January and 02 January if you place your order within the next 19hrs 54mins

Return Policy

Free return within 7 days for ALL eligible itemsDetails

Seller Information

Derek Branding

92%Seller Score

1 Followers

Seller Performance

Shipping speed: Excellent

Quality Score: Excellent

Customer Rating: Good

Product details

Product Type: DC Photovoltaic (PV) Fuse Holder (2-Pole)

Brand: TOMZN

Model: TOPV-32 and TOPV-32X (The unit shown is a 2-pole configuration combining these two).

Primary Application: Solar PV String Protection. It is used to hold fuse links that protect solar panels and inverters from overcurrent/short circuits on the DC side.

Technical Specifications

Specifications

Key Features

1. Modular Design (2-Pole):

The images show a 2-pole unit. In a typical solar setup, this is used to break and protect both the Positive (+) and Negative (-) wires coming from a string of solar panels.

2. LED Indicator (Model TOPV-32X):

One of the poles (labeled TOPV-32X) typically features a red LED indicator.

Function: When the fuse inside blows (melts due to a fault), the light turns on to visually alert you which fuse needs replacing.

The standard TOPV-32 (right side) usually does not have this indicator, though in this specific combined unit, they function similarly as holders.

3. Finger-Safe Enclosure:

The unit is IP20 rated (visible on the side label), meaning it is touch-safe and protects users from accidental contact with live parts when the fuse carrier is closed.

4. 10x38mm Form Factor:

This is the industry-standard size for string-level solar fuses. The holder swings open (pull down on the lever) to allow you to insert or replace the cylindrical fuse link.

Important Safety Warnings

"DO NOT OPEN UNDER LOAD": This is printed clearly on the front and side. This device is not a switch disconnector intended to break the current while the solar panels are generating high power.

Instruction: You must isolate the circuit (turn off the main DC isolator/switch) before pulling these fuse holders open. Opening them while current is flowing can cause a dangerous DC arc flash.

Fuses Not Always Included: Typically, these "Holders" are sold separately from the actual "Fuse Links" (the little cylinder that goes inside). You usually need to buy 10x38mm gPV fuses rated for your specific amperage (e.g., 10A, 15A, 20A) separately.