Stainless Steel Immersion Heater Heating Rod Automatic

Feature:

1. Suitable for many containers, but please note that it is not suitable for thermal bottle.
2. Back working indicator light, red when working, automatically extinguished when the work is over.
3. The heating tube uses stainless steel protective cover to prevent scalding the human body or container.
4. Intelligent temperature control, automatic power off when reaching water temperature, safe and reliable.
5. The power cord is made of PVC housing, which is resistant to high temperature and oxidation, safe to use.

Specification:

Condition: 100% Brand New
Item Type: Immersion Heater
Material: Stainless Steel + PVC
Rated Power: 2500W
Rated Frequency: 50HZ
Type: Anti-scald + Temperature Control + Indicator Light
Length: Approx. 1.5m / 4.9ft
Weight: Approx. 337g / 11.9oz

Use Method and Note:
1. Place the container in a stable place and then place this product. When water is injected, the electric heating tube must be immersed in the water.
2. When the hands and plugs are dry, turn on the power.
4. Avoid twisting and knotting of the power cord during use of this product. In case of overturning, cut off the power immediately.
5. After the water is burned, cut off the power immediately and remove the product after 30 seconds. The surface of the electric heating tube that has just been taken out has a high residual temperature. Avoid contact with the human body, power cord, and not heat-resistant objects, and handle it properly.
7. It is strictly forbidden to use when empty burning, that is, do not use it in the absence of water or lack water, otherwise it may shorten the service life or damage.
8. The firstly boiling water is not suitable for drinking.
9. This product should be placed in a dry, cool and proper place.
10. If the wall of the electric heating pipe is damaged, it should be replaced immediately. Do not use it.
.wang-edit-text{
font-family:'Arial' !important;
}
.wang-edit-text table {
border-top: 1px solid #000;
border-left: 1px solid #000;
}
.wang-edit-text table td,
.wang-edit-text table th {
border-bottom: 1px solid #000;
border-right: 1px solid #000;
padding: 3px 5px;
}
.wang-edit-text table th {
text-align: center;
}

Package List:

1 x Immersion Heater

Note:

1. After plugging in, you must put the entire tube into the water. Do not test the water temperature with your hands, be careful not to get injured!2. Please allow 0-2 cm error due to manual measurement. Thanks for your understanding.3. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.