Shield .SHIELD JETWASHER FOAM WASH- FOR CARS)

A Decon (Decontamination) Shampoo is a heavy-duty car wash soap designed to deep clean paint by breaking down stubborn traffic film, bugs, road grime, and oils. It is highly effective for stripping old waxes, unclogging ceramic coatings, and preparing the surface for polishing or clay bar work. [1, 2, 3, 4, 5]

How to Use Decon Shampoo

Always wash the vehicle out of direct sunlight and make sure the surface is cool to the touch. [1, 2]

Bucket Wash Method:

1. Pre-rinse: Thoroughly rinse the vehicle to remove loose dirt and grit.
2. Mix: Add roughly 30 ml to 50 ml of shampoo to 15 to 20 liters (4–5 gallons) of warm water in a wash bucket.
3. Wash: Wash from the top of the car to the bottom using a clean microfiber mitt or sponge.
4. Rinse: Rinse the vehicle thoroughly before the soap dries on the surface. [1, 2, 3, 4, 5]

Foam  Method:

1. Dilute: Mix the decon shampoo with water in your foam canines bottle, usually at a 10:1 ratio (roughly 50 ml of product to 900 ml of water).
2. Apply & Dwell: Coat the vehicle and allow the foam to dwell for 4 to 5 minutes to lift organic contamination.
3. Rinse: Rinse completely before moving to a contact wash. [1, 2, 3]