Sensor Stick Type Water Detector Switch Liquid Level Sensor

Detailed Information About The Product:

Intelligent non-contact type level detector(Hereinafter referred to level detector) adopts advanced signal processing technology and high speed signal processing chip, break through the effects of vessel wall thickness, realized the real non-contact measurement for the level height in the sealed vessel.
Level sensor(probe) installed on the top and bottom(the high level and the low level) of the measuring vessel wall, non-metal vessel do not need to drill a hole, easy installation, good for the production. Can be used for different kinds of toxic, strong acid, strong alkali, and all kinds of level measurement in the high pressure sealed vessel or tank. The application of this product is very wide, no special requirements for liquid media and vessel material.
1: XKC-Y26-V suitable for non-metal pipe wall, and do not need to contact the liquid, will not corrode by strong acid, strong alkali, and other corrosive liquid. Will not affected by incrustation or other impurities.
2: Intelligent level adjustment and level memory function, level status display method, can realize multi points series connection.It achieves non-contact detection of the liquid level in the closed container.
The liquid level sensor is installed on the upper and lower sides of the container (the liquid level is high and low).The non-metallic container does not need to open the hole.Can detect the level of various toxic substances, strong acids, alkalis and various liquids in high pressure airtight containers
DIY Supplies: Electrical
The liquid level sensor has no special requirements for liquid type and container materials and can be widely used.
The installation is simple and does not affect the production.
The output signal is High and Low Level
Product model:XKC-Y26-V
Input voltage (Vin): DC 5~24V
Output Signal:High and Low Level
Current consumption: 5mA
Output voltage (high level): Vin
Output voltage (low level): 0V
Output current: 1~100mA
Response time: 500mS
Working environment temperature: 0~85 Celsius
Humidity: 5%~100%
Waterproof performance: IP65
Sensitivity:
Pipe outer diameter D(mm) Sensing wall thickness L(mm)
D greater than or equal to 100, L: 20+/-2
100 more than the100 greater than or equal to 80, L: 15+/-2
80 more than the 100 greater than or equal to 60, L: 12+/-2
60 more than the 100 greater than or equal to 40, L: 7+/-1
40 more than the 100 greater than or equal to 30, L: 5+/-1
30 more than the 100 greater than or equal to 20, L: 3+/-1
20 more than the 100 greater than or equal to 10, L: 1.5+/-0.5
Applicable pipe diameter range: greater than or equal to 10mm
Level error: +/-1.5mm
colour:White + black
Material:ABS
SIze:18 x 13 x 11mm
Cable Length:45cm
Package Contents:
1*Liquid level sensor
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.