Rhino Bond Contact Adhesive 3Kg

What to Look for in a Contact Adhesive for Shoemaking

Material Compatibility: For leather, rubber, or mixed materials, you want a contact cement that specifically supports those.

Polychloroprene (Neoprene) Based: Very common for shoe repair / making because it gives a strong bond and some flexibility.

Open Time & Bonding: Typically, you apply on both surfaces, wait until tacky, then press together.

Drying / Cure: Contact adhesives can have quick “tack” but full strength may take time.

Safety: Many contact cements are solvent-based (strong fumes, flammable), so work in a ventilated place and use PPE.

Durability: For shoes, water- and heat-resistance are good to have.

Recommended Contact Adhesives for Shoemakers

Tips for Use in Shoemaking

1. Surface Prep: Clean the surfaces well (no dirt, oil) before applying adhesive.

2. Apply Thin Layers: Coat both surfaces with a thin, even layer.

3. Wait Before Joining: Let the adhesive dry until tacky.

4. Press Firmly: Clamp or press surfaces together well for a good bond.

5. Cure Time: Let the glued parts sit for a while before stressing them.

6. Storage: Seal the adhesive container properly; solvents evaporate if left open, weakening the glue over time.