Multifunctional LED Daytime Running Light Controller Di

Feature:
Multifunctional, constant light + dimming + delay + automatic switch.
Mini and small size, lightweight and waterproof, suitable for all car models.
This car LED daytime running light controller can be used to control your car light intelligently.
When the car is started (the voltage must be higher than 13V+), the daytime running light is automatically turned on.
When the headlights (or reading lights) is turned on, the daytime running lights are dimmed (darkened).
When the car is turned off (the voltage must be lower than 12.5V), the daytime running light is off after 15 seconds delay.

Specification:

Condition: 100% Brand New
Material: ABS
Voltage: 12-18V
Working Current: 5A
Size: Approx. 1.7*2.1*3.9 cm / 0.7*0.8*1.5 in
Weight: Approx. 30g / 1.1 oz
Wiring:
1. First connect the positive and negative pole of the daytime running lights on the left and right sides.
2. Connect the red and black wires of the input terminal with fuse on the controller to the positive and negative poles of the battery, and the red and black terminals of the output terminal to the positive and negative poles of the daytime running light.
3. Connect the yellow line on the controller to the positive pole of the headlight (or reading light). When the headlight (or reading light) is turned on, the brightness of the daytime running light will be halved (darkened) to achieve the dimming function. (Please note that if you don't want the Dimmer function, you can leave alone the yellow wire connection and it does not affect other uses.)
Range of Application:
1. The starting voltage is 13V+, and the flameout voltage is lower than 12.5V (if it is higher than this value, it will be extended for a few minutes until the voltage drops.)
2. 1 pair of daytime running lights total power does not exceed 18W (the total power of most daily running lights will not exceed).
Intelligent Work:
When the car engine is started, the voltage reaches 13V+, and the daytime running light is automatically turned on. When the car is turned off, the voltage is lower than 12.5V (not suitable for cars with a voltage higher than 12.5V after the flameout), and the daytime running light will delay for 15 seconds.
Package list:
1 * LED Daytime Running Light Controller
Note:
1. Just after the battery is connected, the daytime running light will turn on for about 15 seconds and then turn off the light. This is a normal phenomenon (realizing the delay function). After that, you need to start the car. When the voltage reaches 13V+, it will start working.