Liitokala Lii-202 Battery Charger, Charging 18650 1.2V 3.7V 3.2V AA / AAA 26650 10440 14500 16340 25500 NiMH Lithium Battery

This charge is only for charging cylindrical li-ion (3.7V, 3.8V), Ni-MH/Ni-Cd, LiFePO4(Li-ion) batteries.
Please read this instruction before use; Pay attention to the recommended charging current, never select improper charging current
When charge with 5V USB AC adapter, 2A-current AC adapter is recommended
The charger ma get hot during working a long time, handle with care!
Please cut off the electricity and remove the battery from the charger when charging complete.
Indoor condition only!!
The displaying data of the charger is only for reference; please refer to professional test instruments if you need accurate data
2. Feature and Specification:
Micro USB DC 5V input, two independent slots and charging channels with built-in micro-computer management system to ensure the high efficiency
Two charging current options (0.5A/1.0A)
Four LED indicators shows the charging status (25%, 50%, 75%, 100%) and also shows the battery type when insert into battery (1.2V Ni-MH , 3.2V Li-Fe, 3.7V Li-ion, 3.85V li-ion)
Identify Li-ion and Ni-MH automatically; But, you need to adjust the charge mode for LiFePO4 and 3.85V li-ion battery
It can active 0V rechargeable battery but the charger dont charge 1.65V ~ 1.85V battery types.
Buit with Over-charging protection, over-discharging protection and polar reverse protection. Also, it can identify broken battery.
Charing mode: instant current and voltage.
DC input charging: working power source at 5V-2A (Micro plug)
Standard automatical 5V/1000mAh USB output port

3. Select Button, LED and function.
MODE Button:
Press the button to select the battery type when insert into a battery. It begin to charge the battery after fixing the battery type (please noted that it identify Li-ion and Ni-MH automatically, dont need to select manually)
Press the button and hold it for 2 seconds whenever after connection to power, it can switch the charging current between 0.5A and 1.0A;

LED Indicator
Connect the charger to power, all LED indicators will be on, when no battery insert after 5 seconds, LED indicators will be off except the 0.5A current indictor
When battery is inserted into the charger, 4 LED indictors will be on and 3.7V LED indictors flicker, then, please click the MODE button to fix the correct battery type. It will begin to charge the battery 5 seconds later, and the LED indictors will show the charging status.
Press the MODE button to show the battery type( 5 seconds ) during charging and return to show the charging status
It can shows the batterys remaining power when put battery into the charger ( no connection with charging power)
USB output indictor: When USB output is detected, the battery volume indictors will be on for 10 seconds and then off, click the button to show the batterys volume rate.

 4. Specification:
Input: Micro USB DC 5V/2A
Output: 1.4V , 4.2V±0.05V , 3.65±0.05V , 4.35±0.05V
Output current: 500/1000mAh
Constant voltage charging, cutoff current: < 100mAh
Standby current: