LCR TC1 1.8 Inch TFT LCD Display Multimeter

LCR TC1 1.8 Inch TFT LCD Display Multimeter Transistor Tester Diode Triode Capacitor Resistor Test Meter

• I am an international seller

Our shop sells the most popular 3C consumer electronics products,such as mobile phone accessories,computer accessories,game peripherals,smart wearables,and follow the most popular fashion trends. If you like our products,please follow us,become our follower and fan.We will provide you with the most popular products to satisfy your fashion shopping experience.Is Smart Device : noOperating Temperature : 0 - 40 ℃Measuring Capacitance Range : 25-100Measuring Resistance Range : 0.01-50Certification : CEDIY Supplies : ELECTRICALMeasuring Inductance Range : 0.01 mH-20HModel Number : LCR-TC1 : Mainland ChinaDimensions : 1.8inchDC Voltage : 3.7VDisplay Type : LCD Display
• 1.8 inch TFT LCD display: The product features a large 1.8 inch TFT LCD display that makes it easy to read and use.• Multi-functional: This multimeter is not just a resistor tester, but also a capacitor, diode, and transistor tester, making it a versatile tool for electrical professionals.• Wide Operating Temperature Range: The product can withstand temperatures ranging from 0 to 40 degrees Celsius, making it suitable for use in a variety of environments.• CE Certified: The product is certified by CE, ensuring that it meets the safety and quality standards set by the European Union.• Large 1.8 inch TFT LCD display: The product features a large 1.8 inch TFT LCD display that provides clear and easy-to-read results.• Dual Functionality as a Multimeter and Transistor Tester: This product is a versatile tool that can be used as both a multimeter and transistor tester, making it a valuable addition to any electronics enthusiast's toolkit.• Wide Operating Temperature Range: With an operating temperature range of 0-40 degrees Celsius, this product can be used in a variety of environments and is suitable for both hot and cold conditions.• CE Certification: This product has been certified by CE, ensuring that it meets the highest safety and quality standards. This is a cost-effective and widely used transistor detector. Can be used to detect NPN and PNP transistors, , resistors, diodes, triodes, N-channel and P-channel MOSFETs, thyristors, batteries, etc. Can also be used to detect infrared waveforms.    Features: Can be widely used to detect NPN and PNP transistors, , resistors, diodes, transistors, N-channel and P-channel MOSFETs, IGBTs, JFETs, thyristors, batteries, etc.. Zener diodes can also be detected and have a functional self-calibration. After the detection is completed, point the infrared remote control at the "IR" light, and then press the on on the remote control. If the detector dees successfully, the data e and infrared waveform will be displayed. One-key operation, automatic detection and shutdown, you can also press the multi-function on to turn off the detector. Place the pins of the components in the corresponding area, turn the small handle, the detector will automatically detect, and the final result will be clearly displayed on the backlit TFT screen. Instead of the usual black and white display, this detector will display the results in color.    Specification: Power Mode: Rechargeable Lithium Battery Display: 3.5*3cm TFT screen Diode Range: < 4.5V Zener diode: transistor detection area: 0.01-4.5V Zener diode detection area: 0.01-20V Triac Range: IGT < 6mA Capacitance: 25pF- 100mF Resistance: 0.01-50MΩ Inductance: 0.01mH-20H Battery: 0.1-4.5V(with battery) Product chip: High-performance mcu  Instruction: Transistor tester Automatic detection of NPN and PNP bipolartransistors.N-channel and P-chmnnel MOSFETs,JFETs diodes(including double Diodes)N.and P-IGBTS, resisiors, Inductors, , thyristors,triac and battery (0 .1-4.50V) Automatie detection of zener diode (0.01-20v). Self test with automatic calibration IR deer Support Hitachi IR ing IR waveform display Other Measurement results using TFT graphic display(160x128) Auto Power Off(Timeout Settable) Built-in rechargeable Li-ion Battery Li-ion Battery voltage detection- 160x128 TFT display Power on In the power off state, short press the multifunction key, the tester is turnedon and automatically measured. IR der After the component test is completed, point the infrared remote control at the "IR" test hole of the tester, press the remote control on, the tester will display the user e and data e after successful deing, and display the corresponding infrared waveform. If the deing fails or the deing fails, the user e and data e cannot be displayed. At this time, if you are in the tester interface, you cannot enter the infrared deing interface. If you are in the infrared deing interface, the last successful deing information will still be displayed. Detect Zener Diode When the device is turned off or the test is completed, put the Zener diode into the Zener diode test area, press the locking handle, and briefly press the multi-function on. Automatic calibration Short-circuit three test sockets, short press the multi-function on, and the tester will automatically calibrate. During the calibration process, there is no need to perform other operations except to disconnect the short wire according to the prompts. Shutdown Automatic shutdown after timeout When the component test is completed or the infrared deing is completed, and the automatic shutdown time is reached, the tester will automatically shut down (overtime 30 seconds) Standby power consumption is 0 UA after shutdown. Battery voltage measurement Before each component measurement, the built-in lithium battery voltage will be detected and displayed. When the battery voltage is less than 3.1V, it will be forced to shut down. Please charge it at this time.  Package Included:1* Multifunctional TFT Transistor Tester1*Electronic components set1*Cable3*Test hook     Noted: If the quality problem of the product is found after receiving the express, please do not open the dispute at will. Please contact our after-sales customer service to solve it in a timely manner. Thank you for your support and understanding!    Cautions for use: The capacitor shall not be tested without discharge The inductance of the transformer cannot be tested don't test online with electricity Do not hook three hooks onto the circuit board for testing Do not test live circuit boards Otherwise, the tester will be t down. ing the tester is the buyer's reason. When the voltage and internal battery are below 3V, please charge before use. Please use 5V battery or USB port to charge.


,


,


,





,