Kamisafe Rechargeable LED Emergency Lamp,4000mAh

1.Built-in rechargeable and maintenance-free lead-acid battery, with capacity up to 4000 mAh; Long service life, can be charged circularly 500 times above; 

2.Use environmental protection, white, super bright LED, it can work more than 100000 hours; Low power consumption, 60 LED only consumes 6 W; lighting for 4 hours when put on strong light; while weak light consumes 2W and it can last for 12 hours; 

3.Push the switch, you can choose the simplex or duplex LED illuminate. 

4.This product was equipped with a DC power input port which is compatible with the use of solar panel and power adapter. The product also has polarity protection function; 5.Attached with USB output charge function, with strong compatibility, the lamp can meet all kinds of digital products to charge and discharge, like different,brands of cellphones, or Ipad, MP3,PDA,MP4,and game console. It can set according to different brands, model and operation mode. 

6.This product comes with a handle, easy to carry;

7.With emergency function, it is the best choice for all kinds of outdoor leisure, field work, shopping malls as well as other places of emergency lighting.

INSTRUCTIONS TO USE 

1.When using the AC charging, turn the switch to "OFF" insert the AC charger directly into the product power socket, then connect the other end to the 110240V-50/60Hz power socket, the indicating lamp will bright, 12 hours will be needed for a full charge; 

2.The LED won't work no matter it is weak light or strong light while it is charging, it will light up automation when power off; 

3.Push the button forward it is weak light, push one more time it is strong light, back to the original position, it is off; 

4.The product can charge by solar board, solar board out put voltage:6.0-12V,current:0.5A,take 8 hours to full charge; 

5.The product can charge by our cable, cable out put voltage:6.0V,current:0.5A,take 8 hours to full charge; 

6.If adopt USB output charging, Turn the USB switch to "ON" ,insert the USB power cord plug into the lamp USB socket, and another end to the digital product.