Share this product

Impulse Hand Held/ Portable Impulse Heat Manual Sealing Machine

₦ 55,000

₦ 89,00038%

In stock

+ shipping from ₦ 1,000 to LEKKI-AJAH (SANGOTEDO)

0 out of 5

(No ratings available)

2offers starting from₦ 55,000

Delivery Fees ₦ 1,000

Ready for pickup between 25 September and 28 September if you place your order within the next 16hrs 7mins

Delivery Fees ₦ 1,600

Ready for delivery between 25 September and 28 September if you place your order within the next 16hrs 7mins

Free return within 7 days for ALL eligible itemsDetails

Vicky Gas

100%Seller Score

2 Followers

Shipping speed: Excellent

Quality Score: Excellent

Cancellation Rate: Excellent

₦ 59,000

Sold by: Victory interior | Seller Score: 76%

1.The machine without power switch. The AC power cord into the outlet, according to the thickness of the material to be sealed, adjust the heating time. The plastic on the sealing surface, then press the handle, the circuit is automatically controlled heating time. When the light is off, the power is automatically disconnected. After about 1-2 seconds, release the handle on a good seal.
2.The square when an access point appears damaged seal, it is because the heating time is too long, please dial anti-clockwise rotation to shorten the heating time.
3.If the seal is not strong, it is because the heating time is too short. Keep the knob clockwise to extend the heating time.
4.If a plastic bag stuck to the rubber plate, indicating the cooling time is not enough, we must extend the cooling time after the light goes out. Please release handle a little bit late.
5.Adjust heating time later, in use should remain unchanged, in continuous use do not have to make any adjustments.
6.The machine can always plug the AC power cord into the power outlet, do not consume power when not sealed