Hot Glue Gun
Material: plastic aluminum
Working Voltage: 100V-240V
Nozzle Diameter: 1.8 - 2.0mm
Preheating Time: 3-5 minutes
Main Contents: EVA resin, tackifying resin, wax, antioxidant
Easy to Operate:
1. Insert one glue stick into the gun tail.
2. Plug in and switch on, the LED indicator will light up.
3. Preheat for 3-5 minutes.
4. Pull the trigger to extrude glue.
Many Cool Things You Can Do with A Hot Glue Gun:
1. DIY creative birthday gifts for the one you love.
2. Secure picture frame onto wall without nails.
3. Assemble small models.
4. Waterproof LED lights.
5. Fix sandals, toys, loose desk legs, loose desk drawer, etc.
1, To prevent from scalding, please do not touch the solution of the glue that out from the gun.
2, Cut off the power when stop use your glue gun, and keep clean of the glue sticks to avoid impurity block the nozzle.
3, Please don't touch nozzle and the glue liquid when the gun is working.
4, If the glue gun doesn't work for 15 min, please cut off the power source to avoid the melting glue recirculating or damage.
5, The glue stick cannot be taken down once be used.
6, please preheat the hot glue gun for about 3-5 minutes before using.
7, When become short, glue sticks cannot move along any more, please insert a new one to push the remaining one.
8, To avoid clogging, please always use stand and never put the gun flat on side while it's hot.