Yongnuo YN-622C-TX YN622C-TX Transmitter LCD Wirele e-TTL Flash Controller 1/8000s Trier Transmitter for Canon DSLR YN-622C-TX TTL wirele flash controller extends the capability of the YN-622C TTL flash trier system by a big LCD and additional functions. This product adopts flexible LCD menu control, supporting mixed use of the A/B/C three groups of flashes using e-TTL, manual or super sync flash mode, can be adjusted the exposure compensation or flash output of each group. In addition, it supports setting different zoom of the three groups of flash, the remote-controlled distance can reach 100M, supporting seven wirele channels and A/B/C three groups, and equipped with the AF-aist beam emitter. Supports USB firmware upgrade. Specification : LCD screen display, multi-ons quick operation The firmware can be upgraded through the USB interface Support wirele shutter release function The focal length(zoom)of the A/B/C three groups of flash can be adjusted separately Equipped with the AF focus aist light (can be disabled) Grouping flash mode: TTL/Manual flash/Super sync Supporting mixed use of the A/B/C three groups of flashes with TTL, manual flash, or Super Sync flash mode The exposure compensation or flash output of A/B/C three groups of flashes can be adjusted separately Shutter Sync: first curtain sync, second curtain sync and FP high-speed sync, the highest sync speed is 1/8000s Support exposure compensation, flash value lock function(FVL) Support simulate (modeling) flash, red-eye reduction flash Support the flash zooming (auto) Super Sync (SS) time delay adjustment, for higher x-sync speed than the camera allows Settings saved automatically The flash sync signal can be input through the PC port Support the basic flash trier (max sync speed is 1/250s) of standard hot shoe (non Canon body) Range up to 100m Power supply: 2 AA batteries *The above functions need to be used with the YN-622C transceiver. Compatibility: Cameras: (Users can set the flash through camera menu): For Canon 1Dx, 1Ds III, 1D IV, 1D IIII, 5DIII, 5DII, 7D, 60D, 50D, 40D, 650D/T4i, 600D/T3i, 550D/T2i, 500D/T1i, 450D/Xsi, 400D/Xti, 1100D, 1000D (Users should set the flash through flash panel): Canon 1D II, 1D, 5D, 30D, 20D, 10D, 350D, 300D Flashes: eTTL flashes support TTL function and HSS(it suports wirele remote control through camera menu): For Canon 600EX-RT, 580EX II, 430EX II, 320EX, 270EX II, Yongnuo YN-568EX II, YN-568EX, YN-565EX, YN-468II, YN-467II eTTL flashes support TTL function and HSS(Users should set the flash through flash panel): For Canon 580EX, 550EX, 540EZ, 430EX, 430EZ, 420EX, 420EZ, 380EX Package included: 1 x YN-622C-TX Transmitter 1 x User manual 1 x LS-2.5/C1 Shutter Connecting Cable 1 x LS-2.5/C3 Shutter Connecting Cable
About shippingShipping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 2 business days ar buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for remote areas,it may take a little longer).
Special Announcement:Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties ores. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .
Your 100% satisfaction is very ant to usIf the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.