YD-RP2040 RP2040 Vcc-gnd Studio Micropython/CircuitPython/Arduino Raspberry Pi Pico-PLUS MCU Board Microcontroller Board

YD-RP2040 microcontroller board

C/Micropython/CircuitPython/Arduino

Dual-core Arm Cortex-M0+/264KB internal RAM/4M off- Flash(W25Q32)/Type-C USB/WS2812 RGB/PWR LED/USR key/REST key

High performance.Low cost. Small package.

Flexible I/O connects RP2040 to the physical world by allowing it to speak to almost anyexternal device. High performance breezes through integer workloads. Low cost helps ease the barrier to entry.

This isn’t just apowerful : it’s designed to help you bring every last drop of that power to bear. With six independent banks of RAM, and a fully connected switch at the heart of its bus fabric, you can easily arrange for the cores and DMA engines to run in parallel without contention.

C/C++

For power users and profeional developers, we provide a complete C SDK, a GCC‑based toolchain,and Visual Studio Code integration.

Micropython

For hobbyists and beginners, we provide a polished port of MicroPython for RP2040,which exposes all the ’s hardware features.

CircuitPython

The Raspberry Pi foundation changed single-board computing when they released the Raspberry Pi computer, now they’re ready to do the same for microcontrollers with the release of the  Raspberry Pi Pico. This low-cost microcontroller board features a powerful new , the RP2040, and all the fixin’s to get started with embedded electronics projects at a stre-free price.

Users can also pay attention to other development methods.

For example： Javascript，Arduino，Rust，Lua，Go，FreeRTOS，free pascal，Lisp

Compared to the official Raspberry Pi Pico, VCC-GND Studios' YD-RP2040 has the following improvements:

Added PWR power LED

The USB interface was changed to type-C USB

Added reset on to facilitate reset operation and firmware update operation.

Added the USRkey user on（GPIO24).

Added RGB lights（GPIO23）

Change PICO's W25Q16 to W25Q32（4M）/W25Q64（8M）/W25Q128（16M）

To update the firmware operation:

First, connect the computer via a USB cable.

Pre and hold the BOOT on;

Pre the RST on;

Release the BOOT on ar 1 second;

The computer will automatically recognize it as a removable hard disk;

Copy the firmware files to hard disk that appears and the core board will automatically reboot.

Instructions for using the USB cable

The on-board USB port of the YD-RP2040 core board is the Type-C interface

It can communicate with the computer and provide power

The cable can be used: USB Type A to Type-C cable or CC cable

Note the distinction between the commonly used USB A port to Type-C cable that can only be charged, which cannot be used for communication between YD-RP2040 and the host.

The MIT software Thonny, written by the University of Tartu in Estonia, was recommended for the development of the Python.

About shipping
Shipping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 2 business days ar buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for remote areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties ores. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.