* this product comes from China
It is perfect for a variety of domestic, institutional and industrial heating and cooling applications.
characteristics:
heating or cooling control
double red and double blue led display
independent dual-way temperature controller
temperature display resolution 0.1
Direct power output
Supports high (low) temperature alarm and supports power loss (sudden power failure parameters remain
valid The application range is like temperature control in home, farm, cold storage, greenhouse, aquarium, etc.
Specifications:
Display Type: Digital
Material: ABS +PCB
Style: Floor station
Temperature sensor: NTC 10K Source of
Power: 110-220VAC 50/60Hz, 12V DC, 24V DC (choose power supply when ordering)
Power consumption: 3W
Relay contact capability: two relays
maximum 10A, direct output Item size: 7.5*5.5*3.1cm/2.95*2.16* 1.22in
Item Weight: 80g/2.82oz
Set start temperature:
Press the “up” button once to display the start temperature. Press and hold the “up” button for about 3 seconds, the required temperature can be adjusted with the up and down keys
Set the stop temperature:
Press the button once to display the stop temperature. Press and hold the button for about 3 seconds and the stop temperature number will flash. The required temperature can be adjusted with the up and down keys
Press “Up 1” button and “Up 2” button at the same time to set the mode
How to restore factory settings
press the “Down 1” and “Down button 2” at the same time, the factory settings will be restored.
temperature correction
Press “Up 1” and “Down 1” at the same time for 3 seconds. positive value = measured value+corrected value (group 2 temperature correction is the same method)
note:
Heating mode:
Default Set Range Code Function
P0 Compressor 1 Delay time 0-60min 0min P1 Compressor 2
Delay time 0-60min 0min Compressor 2 Delay time 0-60min 0min
Package List:
1 * temperature controller
2 * waterproof sensor