X1006 PCIe To 2.5Inch SATA SSD/HDD+M.2 2280 SSD Shield For Raspberry P

Detailed Information About The Product:

Compatible with for Raspberry Pi 5B and supports expansion of other HATs of for Raspberry Pi; Supports simultaneous connection of 2.5-inch SATA hard disk and M.2 2280 SATA SSD.
Compliant with Serial ATA 3.0 specification backward compatible with SATA 2.0 and SATA 1.0; Supports HAT+ STANDBY power state automatically shuts down SATA devices when Pi5 is powered off.
Supports communication rates of 5.0 Gbit/s 3.0 Gbit/s and 1.5 Gbit/s; Compatible with SATA 6G 3G 1.5G hard disks.
Support dual hard drives - can connect SATA2.5-inch hard drives and SATA M.2 KEY-B 2280 so lid-state drives at the same time not compatible with M.2 NVMe SSDs M.2 PCle AHCl SSDs or other M.2 non-sata devices and does not support booting from HDD/SSD using existing firmware.
Based on PI5's PCle interface design connected to PI5 via FFC cable powered from for Raspberry Pi5 via pogo pins.

Notes:
X1006 is designed for data storage purposes and does not currently support booting from HDD/SSD using existing firmware.
Not compatible with M.2 NVMe SSDs M.2 PCle AHCl SSDs or other M.2 non-sata devices.
New hard drives do not have partitions and need to be partitioned and formatted when used for the first time before they can be accessed in Explorer.
Product Introduction:
X1006 is a PCIe to SATA HDD/SSD expansion board designed for Raspberry Pi 5. It supports SATA 2.5-inch hard disks and SATA M.2 KEY-B 2280 so lid-state drives providing large-capacity storage and high-speed storage solutions for Raspberry Pi 5 giving full play to its storage capacity. The SATA 3.0 interface speed can reach up to 5Gbps.
X1006 is installed at the bottom of the for Raspberry Pi 5 and will not affect the use of GPIO. It is convenient to expand other HATs. In addition X1006 and the hard disk are powered by the for Raspberry Pi 5 through the 4 pins on the board simplifying the power supply without the need for extra power.
Note:Due to different production batches the printed words may vary which will not affect the use.
Colour:Black
Material:PCB

Package Contents:
1 * X1006 PCIe to 2.5Inch SATA SSD/HDD+M.2 2280 SSD kit

Only the above package content other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
About Us
We provide the good product with the best pricewe support Wholesale/Drop Shipping Order
1. For Drop Shipping order please remark"dropshipping order" we will prioritize it.
2. For Wholesale/Drop Shipping orders if you have any ideas about the price or packageplease contact us in advancewe will give you the best service to satisfy your demands.
About Shipments
1.We will send out the orders ASAP once your payment is completed normally.
2.Please write your complete delivery address with correct phone number and zip code especially please confirm your full name.
About After-sale Service
We are reliable seller and we have our professional after-sale service for all of our customers. If there is any question about the orderplease contact us in advance we will always here until you get a happy answer.
About Feedback
1. Please check the package and item when you get carefully to make sure there is no problem.
2. If you have any problem or are not entirely satisfied with your packageplease don’t be hesitate to contact us first before leaving negative feedback. We will resolve the problem to satisfy you.
3. If there is no problem please leave us five star positive feedback.
Your affirmation is our greatest motivation ! ! !