Wireless WiFi Door Window Sensor Smart Remote Control Low Energy Home Alarm Compatible with Alexa

START YOUR SMART LIFESTYLE - Do you want your home lights to turn on automatically once you enter the front door? Just integrate the sensor with your smart lights! Create a smart scene on Smart Life App your light can turn on automatically when you open the door. Note: Require your smart light can be added to Smart Life App.

Versatile Sensor Inside Your Home - The door window sensor will be triggered when the door or window is opened or closed you will receive an instant notification and alarm on your phone within about 2-8 seconds depending on the Wifi networks. NOTE: Only supports 2.4GHz.

24/7 PRO MONITORING - The push notifications function can be turned off on the APP when you are at home and the wifi door sensor will continue to record the history so that you can check it whenever you need. Gives you complete peace of mind.

EASY INSTALLATION - With tape and screws all the items you need to get started are in the box. You can use double-sided tape or screws to fix the sensors to the door and window frames. Please make sure the sensor is aligned with the magnet and the gap is less than 10mm.

Smart Style

You can realize the function of turning on the light on auto when you come home by creating a smart scene on APP and you can DIY different scenes by adding a condition and a task. Example add condition "when door sensor is opened" add task "

No wiring needed

With 2 pre-installed batteries with a pull tab just remove the tab to get ready to work.

2 ways to install

Use double-sided glue or screw to install. Just stick or screw the sensor to your door window frame.

Low battery consumption

Battery life on standard use up to 16 months depending on usage temperature and other factors. The APP will tell you the battery level.

How to set up the WiFi door sensor?

1.Download and go to APP "Smart life" Click the "+" icon on the top right corner

2.Choose the "Contact Sensor" in "Security and sensor"

3.Input your 2.4GHz wifi password and click "Next"

4.Open the battery cover and remove the insulation sheet

5.Long press the reset button for 5 seconds until the indicator light turns to fast flashing

6.Click "confirm the indicator flashes fast" and then click "Next"

7.Wait until the process bar reaches 100%