Universal Car Alarm Syst Auto Remote Central Kit Door Lock Keyless Entry System Central Locking With Remote Control-315MHz

Specification: Material: ABS Product size: 98*34*10mm/3.85*1.33*0.39'' Rated voltage: 12 (V) Rated current: 10 (mA) Installation mode: wirele Corresponding frequency: 315MHZ,433MHZ Modulation mode: ASK Wirele transmiion distance: 50-100m (open space) Application: garage door, alarm, automatic door, rolling door, etc Type of copied : 2260 (e.g. PT2260, SC2260, LX2260,HX2260); 2262, (such as PT2262, SC2262, LX2262,HS2262,HX2262, etc.), PT2264, PT2240 (LX2240), 1527(such as EV1527, HS1527, HX1527), FP527, CS5211, SMC918, SMC926, AX5026, ax5326-3, ax5326-4, HT600, HT680, HT6207, HT6010, HT6012, HT6013, HT6014, HT12D, HT46F49E, PIC16F629, PIC16F630, etc., can also copy other types of s compatible with the above mentioned s. Different manufacturers will have different prefix model, as long as the model number Part of the same can be copied Note: We generally do not recommend copying roll code , because there is a lot of uncertainty when copying roll code . When copying roll code remote control, we cannot determine whether the remote control is an or not, and we do not recommend copying roll code remote control with a pair of remote control. Operation Manual: 1. Clean code: shut at the same time hold the lock with two keys (some of the shell are the two key) upward and downward, the LED indicator lights flashing three times, pre release any one of the key, another is not loose, click the release on three times, rapid flashing LED light into the state, at this time of memory data all cleared, ar cleaning the data of the remote control, pre any key, the LED indicator is on. 2. Copy: One hand-held remote controller, the other hand-held copy remote controller, two remote controllers as close as poible, (ideally two remote controllers zero distance side by side on the desktop) respectively pre the required copy ons, LED indicator flickers quickly ar three flickers, copy succe, other key operation method is the same. Some remote controllers have low transmitting power, so they should be equipped with remote controllers and back-to-back operation of copying remote controllers to cope well. If there is interference in some operating envments, interference operation should be avoided. If copying is not good, copying should be done again ar code clearance. 3. Recovery: When you inadvertently clear the code of the copying remote controller, you can pre the bottom two keys of the copying remote controller at the same time. Ar three flashes of the LED lamp, it will flicker quickly. Ar release, you pre any key again and the light is long, which indicates that the code of the copying remote controller has been restored. Before using our copy remote control to copy, please make sure to clear the existing code of the copy remote control first. 4. How to control some of the keys ar copying, and the rest can not be control LED , you can use the tips of cleaning and restoring operation, the specific operation is as follows: (1) Clearing the code first. (2) Copy the keys that have not been copied succefully again ar the succeful code clearance, and do not copy the keys that have been copied succefully before. (3) Clearing the code again. (4) Make a restore operation once; at this time, the key that had not been succefully copied was covered by the new copy code, while the copy of the succeful code was retained. If there are still keys that have not been copied succefully ar the second copy, they can be coded again, and the keys that have not been copied succefully can be copied again, and then coded and restored again. This is repeated until all keys are succefully copied. This little trick can be used to reduce the hale of repetitive operations. Warm Tips: 1. Prerequisites for selecting the duplicate remote controller: the remote controller has normal function, the remote control is the same or compatible, and the remote control work frequency is the same. 2. The copying remote controller can only copy fixed code, learning code and remote controller of some single computers (the type of that can be copied is shown in the description of the type of that can be copied). 3. Two-way remote controller, scroll code remote controller and single- program remote controller can not be copied. Such as HCS200, HCS201, HCS300, HCS301, etc. 4. Before copying the remote controller, make sure that the existing code of the remote controller has been cleared and check whether the code has been cleared succefully. Otherwise, replication is not poible. 5. Make sure your remote controller has enough power when copying. The closer the two remote controllers are, the better. If the copy distance is too close, the switch can copy from different angles. Preing the on of the remote control requires that the transmitting signal be completely normal, and then pre the on of the duplicate remote control to ensure that the function is completely duplicated. Note: Please allow 1-3mm differs due to manual measurement. Due to the different display and different light, the picture may not show the actual color of the item. Thanks for your understanding.

1 X Cloning Remote Control

About shipping
Shipping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 2 business days ar buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for remote areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties ores. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.