Tuya 7 Way WiFi Remote Control Relay Adapter Switch DC 7-27V AC 85-250V Jog Interlock Linkage 433mhz RF IoT Relay Module

[4G remote] (basic function) Tuya 7-way wifi remote control jog interlock linkage 433 remote control RF IoT remote relay module

Product power supply DC7-27V and AC85-250V power supply

Product models are divided into:

1: DC7-27V WIFI version

2: AC85-250V WIFI version

3: Matching shell

Download "Tuya Smart" from the market, install and register, power off the module and restart it, open the APP, and click the + sign in the upper right corner to add devices.

【Remote control】Only supported if you have purchased a remote control) (If there is a f that does not meet the steps during the operation, please turn off the power and try again),

Note: Power off and on again, wait for the indicator light to finish fing before operating.

Action explanation: s-locking (pre once to open, pre again to close)

Action explanation: jog (click and turn on and off automatically after about 0.5 seconds),

Action explanation: Pre the lock (pre and hold it, release it and close it)

Action explanation: only open (this key can only be opened, cannot be closed)

Action explanation: only close (this key can only be closed, not open)

Action explanation: interlock (this function needs to be set on the APP)

Action explanation: Timing (this function needs to be set on the APP)

Action explanation: delay (this function needs to be set on the APP)

The circuit board setting on setting method supports remote control and 433mhz remote control as follows:

(Learning s-locking) Quickly pre the "Setting" on 5 times, relay 1 fes, (click the setting on to change the learningrelay number), at this time, long pre a key on the remote control to learn a key, you can continue to pre all the keys, after the operation, you need to power off and restart;

Interlock setting instructions: (requires Tuya APP setting)

●Input 2 on the top and 2 on the bottom, which means 1.2. Interlock

●Input 3 on the top and 3 on the bottom, which means 1.2.3 interlock

●Input 10 on the top and 10 on the bottom, which means interlocking 1.2.3.4.5.6.7.8.9.10

●Input 4 on the top and 2 on the bottom, which means 1.2. Interlock, 3.4. Interlock

●Input 8 at the top and 2 at the bottom, which means 1-2 interlock, 3-4 interlock, 5-6 interlock, 7-8 interlock

●Input 10 at the top and 5 at the bottom, which means 1.2.3.4.5 interlock, 6.7.8.9.10. interlock

●Enter 0 above and 0 below, indicating no interlock

【Jog setting】

● number input 1, the current jog time of 1 will be displayed below, and the jog time can be changed such as 500 milliseconds.

● number input 2, the current jog time of 2 will be displayed below, and the jog time can be changed such as 500 milliseconds.

●Joing time input 0 means this does not jog, set other s by ogy.

Description: Jog time range: 1-999999999 milliseconds

【Power-on settings】

●Input 1 for the number, the value of the current will be displayed below

●Input 1 below, which means that the will be automatically opened when the power is turned on

●Enter 2 below to indicate that the is turned off after power-on

●Input 3 below, which means that the switch state before power-off will be maintained after power-on

●Input 4 below, which means it is forced to open after power-on, and the mobile phone will never be able to operate this

[Delayed opening] (Some products do not support it, if you need it, you can add it before shooting)

●Input 1 on the top, and the current setting value of 1 will be displayed on the bottom

●Input 3000 below, which means that the will not be opened when clicked to open, but will be opened automatically after 3000 milliseconds.

[Delay off] (Some products do not support it, if you need it, you can ask for more before shooting)

●Input 1 on the top, and the current setting value of 1 will be displayed on the bottom

●Input 3000 below, which means that the will not be closed when you click Close, but will be closed automatically after 3000 milliseconds.

[Learning Remote Control] (Optional)

●Power off and on again for 5 seconds, quickly pre the setting on 5 times (pre a little faster), the indicator light of 1 will keep fing, at this time pre and hold 1 on of the remote control until 2 fes, and then pre Hold down the other on on the remote until 3 fes, pre all the ons in the same way, and finally turn off the power and turn it on again;

[Restore factory settings]

Pre and hold "Settings" for 10 seconds, let go when the indicator light fes quickly, and it's done.