TSPZEM-061 Multifunction LCD Digital AC Voltage Current Powe

Description::
1. Power alarm threshold preset function (can set power alarm threshold).
2. Display interface is large-screen LCD, it can display voltage, current, power, energy parameters at the same time.
3. The backlight can be turned on or off by shortly pressing the button. The backlight will be saved automatically when power is off.
4. Overload alarm function (over power alarm threshold, backlight and power flicker).
5. The instrument has the characteristics of precision and stability, small size, easy to carry.


Specifications:
Condition: 100% Brand New
Item Type: Digital AC Meter
Material: ABS
Color: As shown in the picture
Display Screen Size: Approx.51x30mm/2x1.2in
Overall Size: Approx.89.6x49.6x24.4mm/3.5x2x1in(L x W x T)
Power:
Test Range: 0~22kW
within 1KW, the display format is 0.0~999.9W.
1KW and above, the display format is 1000~9999W.
10KW above display format: 10-22KW.
Energy:
Test Range: 0~9999kWh
Within 10KWh, the display format is 0~9999Wh.
10kWh and above, the display format is 10~9999kWh.
Voltage:
Test Range: 80~260V
Display Format: 80~220V
Current:
Test Range: 0~100A
Display Format: 0.00~99.00
Working Voltage: 80 - 260VAC
Test Voltage: 80 - 260VAC
Rated Power: 100A/22KW
Working Frequency: 45-65Hz
Measurement Accuracy: level 1.0
Weight: Approx.104g/3.7oz
Backlight Controlling:
The backlight can be turned on or off by shortly pressing the button. The backlight will be saved automatically when power is off.
Reset Energy:
Step1: Long press the key for 5 seconds until the number in energy display window flash, then release the key.
Step2: Short press the key again, then the energy value is cleared and exit the reset flashing state.
Step3: Then long press the key again for 5 seconds until the number doesn't flash, it means the energy value is not cleared and will exit the reset state.
Set power alarm threshold
Step1: Long press the key until the LCD screen display “SET CLr”, then release the key to enter the setting state
Step2: Power window display the current power alarm value and the last digit begin to flash, then you can short press to plus 1, when there is no operating over 3 seconds, it will switch the digit position automatically, the setting method is as same as the above.
Step3: After finish the setting, long press the key over 5 seconds will store automatically and exit, the range of active power threshold is 0.0~4.5kW
.


Package list:
1 x Digital AC Meter1 x Instruction Manual
Note:
1. This module is suitable for indoor, please do not use outdoor.2. Applied load should not exceed the rated power.3. Wiring order can't be wrong.